Crankshaft Main Bearings - Remove
Show/hide table
Required Tools | |||
Tool | Part Number | Part Description | Qty |
A(1) | 253-3272 | Cylinder | 2 |
B(2) | 178-9312 | Hose As | 2 |
C(3) | 253-3276 | Distribution Coupler | 1 |
185-0683 | Gage As | 1 | |
D(4)(5) | 227-6724 | Electric Hydraulic Pump Gp (120 V) | 1 |
227-8834 | Electric Hydraulic Pump Gp (240 V) | 1 | |
191-5347 | Hydraulic Pump Gp | 1 | |
156-7167 | Manual Hydraulic Pump | 1 | |
E | 279-3473 | Engine Turning Tool | 1 |
329-3831(6) | Air Power Turning Tool | 1 | |
F | 369-4007 | Bearing Driver | 1 |
G | - | Guide Stud M20 - 2.5 by 250 MM | 2 |
Show/hide table
(1) | Part of Tool Group 278-1150 |
(2) | Part of Tool Group 278-1150 |
(3) | Part of Tool Group 278-1150 |
(4) | Use any of the pumps that are listed in Tooling (D) for this procedure. |
(5) | The latest pumps and hoses require |
(6) | Optional |
Start By:
- Remove the starting motors.
- Remove the fuel pump.
- Remove the engine oil pump
- Remove the engine oil cooler.
- Remove the engine oil scavenge pump.
- Remove bolts (1) and remove side cover (2). Repeat for the remaining side covers on both sides of the engine.
- Remove bolt (5) from each side of the engine and install Tooling (G).
Show/hide table
Illustration 3 g01212105 - Install Tooling (A) onto the studs for the crankshaft main bearing cap. Tighten the threaded collar of Tooling (A). Loosen the threaded collar of Tooling (A) by 1 1/2 turns. Attach Tooling (B) onto Tooling (A). Attach Tooling (B) onto Tooling (C). Attach Tooling (C) onto Tooling (D). Apply approximately
135 MPa (19580 psi) of pressure to Tooling (A). Use the drive on Tooling (A) in order to loosen the nuts for the crankshaft main bearings. Rotate the drive on Tooling (A) by approximately three turns. Release the pressure on Tooling (A). Remove Tooling (A).Show/hide tableIllustration 4 g01212274 - Remove crankshaft main bearing nuts (3). Remove plate (4).
Show/hide table
Illustration 5 g01212288 - Slide down crankshaft main bearing cap (6) on the studs. Remove crankshaft main bearing (7) from crankshaft main bearing cap (6).
- Install Tooling (F) in order to remove the upper crankshaft main bearing. If necessary, use Tooling (E) in order to rotate the crankshaft and remove the upper crankshaft main bearing.
Show/hide table
Illustration 1 | g01212026 |
Show/hide table
Illustration 2 | g01212278 |
Caterpillar Information System:
814K, 816K, 826K 836K Landfill Compactors, 815K, 825K, Soil Compactors, 824K, 834K, 844K, 854K Wheel Dozers and 986K, 988K, 990K, 992K,994K Wheel Loaders Information Display Machine Settings Menu
814K, 816K, 826K 836K Landfill Compactors, 815K, 825K, Soil Compactors, 824K, 834K, 844K, 854K Wheel Dozers and 986K, 988K, 990K, 992K,994K Wheel Loaders Information Display Menu Navigation
814K, 816K, 826K 836K Landfill Compactors, 815K, 825K, Soil Compactors, 824K, 834K, 844K, 854K Wheel Dozers and 986K, 988K, 990K, 992K,994K Wheel Loaders Information Display Display Settings
814K, 816K, 826K 836K Landfill Compactors, 815K, 825K, Soil Compactors, 824K, 834K, 844K, 854K Wheel Dozers and 986K, 988K, 990K, 992K,994K Wheel Loaders Information Display Display Navigation
980L Medium Wheel Loader Power Train, Steering, Braking, Hydraulic, and Machine Systems Oil Coolers and Cooling System Operation
C11, C13, C15, and C18 Industrial Engines Symptom Troubleshooting
Cab Glass May Break on Certain 980M and 982M Wheel Loaders {7251, 7310} Cab Glass May Break on Certain 980M and 982M Wheel Loaders {7251, 7310}
C2.4 Tier 4 Final Engines for Caterpillar Built Machines Electrical Connectors
C2.4 Tier 4 Final Engines for Caterpillar Built Machines Diagnostic Capabilities
C13 Engines for Caterpillar Built Machines Fuel Temperature Is High
C13 Engines for Caterpillar Built Machines Engine Overspeeds
C175-16 and C175-20 Locomotive Engines Auxiliary Water Pump - Install
814K, 816K, 826K 836K Landfill Compactors, 815K, 825K, Soil Compactors, 824K, 834K, 844K, 854K Wheel Dozers and 986K, 988K, 990K, 992K,994K Wheel Loaders Information Display Parameter Menu Via ECM
814K, 816K, 826K 836K Landfill Compactors, 815K, 825K, Soil Compactors, 824K, 834K, 844K, 854K Wheel Dozers and 986K, 988K, 990K, 992K,994K Wheel Loaders Information Display Parameter Menu Via Type
910K, 910M, 914K, 914M, 918M, and 920K Wheel Loaders Power Train General Information - 910K, 914K
910K, 910M, 914K, 914M, 918M, and 920K Wheel Loaders Power Train General Information - 910M, 914M, 918M, 920K
814K, 816K, 826K 836K Landfill Compactors, 815K, 825K, Soil Compactors, 824K, 834K, 844K, 854K Wheel Dozers and 986K, 988K, 990K, 992K,994K Wheel Loaders Information Display Tire Pressure Parameters
814K, 816K, 826K 836K Landfill Compactors, 815K, 825K, Soil Compactors, 824K, 834K, 844K, 854K Wheel Dozers and 986K, 988K, 990K, 992K,994K Wheel Loaders Information Display Totals Menu
814K, 816K, 826K 836K Landfill Compactors, 815K, 825K, Soil Compactors, 824K, 834K, 844K, 854K Wheel Dozers and 986K, 988K, 990K, 992K,994K Wheel Loaders Information Display Service Test Menu
814K, 816K, 826K 836K Landfill Compactors, 815K, 825K, Soil Compactors, 824K, 834K, 844K, 854K Wheel Dozers and 986K, 988K, 990K, 992K,994K Wheel Loaders Information Display Operator Profile Menu
910K, 910M, 914K, 914M, 918M, and 920K Wheel Loaders Power Train Hydrostatic Drive System - 910M, 914M, 918M, 920K
814K, 816K, 826K 836K Landfill Compactors, 815K, 825K, Soil Compactors, 824K, 834K, 844K, 854K Wheel Dozers and 986K, 988K, 990K, 992K,994K Wheel Loaders Information Display Pop-Up Messages
814K, 816K, 826K 836K Landfill Compactors, 815K, 825K, Soil Compactors, 824K, 834K, 844K, 854K Wheel Dozers and 986K, 988K, 990K, 992K,994K Wheel Loaders Information Display Module - Flash Program
814K, 816K, 826K 836K Landfill Compactors, 815K, 825K, Soil Compactors, 824K, 834K, 844K, 854K Wheel Dozers and 986K, 988K, 990K, 992K,994K Wheel Loaders Information Display System Schematic