Fuel System Primary Filter (Water Separator) - Check/Drain
Show/hide table
 |
|
Fuel leaked or spilled onto hot surfaces or electrical components can cause a fire. To help prevent possible injury, turn the start switch off when changing fuel filters or water separator elements. Clean up fuel spills immediately. |
Show/hide table
| NOTICE |
|---|
|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the machine. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide"for tools and supplies to collect and contain fluids in Caterpillar machines. Dispose of all fluids according to local regulations. |
Show/hide table
| |
| Illustration 1 | g06091303 |
- The fuel filter is located inside the access doors on the left side of the machine. Open the access doors.
Show/hide table
Illustration 2 g06091312 - Extend the drain hose (2) into a suitable container. The drain (1) is located under the primary fuel filter/water separator.
- Open the drain. Allow the fluid to drain into the container.
- After the separator is completely drained, close the drain by hand pressure only. Dispose of the drained fluid in a safe place.
- Close the access doors.
Caterpillar Information System:
D5R and D6N Track-Type Tractor Engine Supplement Belt Tensioner - Remove and Install
980M and 982M Medium Wheel Loader Power Train, Steering, Braking, Hydraulic, and Machine Systems Location of Components (Hydraulic System)
D5R and D6N Track-Type Tractor Machine Systems Hydraulic Tank - Remove and Install
910K, 910M, 914K, 914M, 918M, and 920K Wheel Loaders Machine System Gear Pump (Implement) - 910K, 910M
814K Wheel Dozer Machine Systems Hydraulic Tank - Assemble
New Door Seal To Improve Rattling And Sealing Of Door In Certain D6T Track-Type Tractors {7308} New Door Seal To Improve Rattling And Sealing Of Door In Certain D6T Track-Type Tractors {7308}
814K Wheel Dozer Machine Systems Hydraulic Tank - Disassemble
980M and 982M Medium Wheel Loader Power Train, Steering, Braking, Hydraulic, and Machine Systems General Information (Hydraulic System)
910K, 910M, 914K, 914M, 918M, and 920K Wheel Loaders Machine System Relief Valve (Main)
910M, 914M, 918M, 910K, and 914K Compact Wheel Loaders, Engine Supplement Air Cleaner - Remove and Install
910K, 910M, 914K, 914M, 918M, and 920K Wheel Loaders Machine System Relief Valve (Load Sensing Signal)
910K, 910M, 914K, 914M, 918M, and 920K Wheel Loaders Machine System Main Control Valve
D5R and D6N Track-Type Tractor Machine Systems Hydraulic Tank - Disassemble
814K Wheel Dozer Machine Systems Operator Platform - Remove and Install
3512E and 3516E Marine Engines Control Cabinet - Assemble
Bench Test Procedure for a 631K and 637K Wheel Tractor Scraper Transmission {0599, 3030, 3073} Bench Test Procedure for a 631K and 637K Wheel Tractor Scraper Transmission {0599, 3030, 3073}
Improved Grease Line in the Front Lines Group Is Now Used on Certain 980M and 982M Wheel Loaders {7510, 7540} Improved Grease Line in the Front Lines Group Is Now Used on Certain 980M and 982M Wheel Loaders {7510, 7540}
973K Track Type Loader Maintenance Interval Schedule
Procedure to Install Grease Line in the Front Lines Group on Certain 980M and 982M Wheel Loaders {7510, 7540} Procedure to Install Grease Line in the Front Lines Group on Certain 980M and 982M Wheel Loaders {7510, 7540}
910K, 910M, 914K, 914M, 918M, and 920K Wheel Loaders Machine System Calibrations, Diagnostic Tests (Cat ET)
Procedure to Rework the Governor and Brake Pedal for Certain D3K2, D4K2, and D5K2 Small Track Type Tractors {4122} Procedure to Rework the Governor and Brake Pedal for Certain D3K2, D4K2, and D5K2 Small Track Type Tractors {4122}
D5R and D6N Track-Type Tractor Machine Systems Hydraulic Tank - Assemble
854K Wheel Dozer Seat Belt Reminder System
An Improved Dust Ejector Hose is Now Available for Certain 988K Large Wheel Loaders, 834K Large Wheel Dozers, and 836K Compactors {1068, 7554} An Improved Dust Ejector Hose is Now Available for Certain 988K Large Wheel Loaders, 834K Large Wheel Dozers, and 836K Compactors {1068, 7554}