Belt Tensioner - Remove and Install
Start By:
- Remove the engine side guards.
- Remove the right side fan guard.
- Remove belt (1). Refer to Operation and Maintenance Manual, "Belts - Inspect/Replace" to remove and install the belt.
- Remove bolt (2) and belt tensioner (3).
Show/hide table
| |
| Illustration 1 | g06091232 |
- Install belt tensioner (3) in the reverse order of removal.
- Tighten bolt (2) to a torque of
45 ± 5 N·m (33 ± 4 lb ft) .
- Tighten bolt (2) to a torque of
Caterpillar Information System:
980M and 982M Medium Wheel Loader Power Train, Steering, Braking, Hydraulic, and Machine Systems Location of Components (Hydraulic System)
D5R and D6N Track-Type Tractor Machine Systems Hydraulic Tank - Remove and Install
910K, 910M, 914K, 914M, 918M, and 920K Wheel Loaders Machine System Gear Pump (Implement) - 910K, 910M
814K Wheel Dozer Machine Systems Hydraulic Tank - Assemble
New Door Seal To Improve Rattling And Sealing Of Door In Certain D6T Track-Type Tractors {7308} New Door Seal To Improve Rattling And Sealing Of Door In Certain D6T Track-Type Tractors {7308}
814K Wheel Dozer Machine Systems Hydraulic Tank - Disassemble
980M and 982M Medium Wheel Loader Power Train, Steering, Braking, Hydraulic, and Machine Systems General Information (Hydraulic System)
910K, 910M, 914K, 914M, 918M, and 920K Wheel Loaders Machine System Relief Valve (Main)
910M, 914M, 918M, 910K, and 914K Compact Wheel Loaders, Engine Supplement Air Cleaner - Remove and Install
910K, 910M, 914K, 914M, 918M, and 920K Wheel Loaders Machine System Relief Valve (Load Sensing Signal)
910K, 910M, 914K, 914M, 918M, and 920K Wheel Loaders Machine System Main Control Valve
D5R and D6N Track-Type Tractor Machine Systems Hydraulic Control Valve - Remove and Install
992K Wheel Loader Fuel System Primary Filter (Water Separator) - Check/Drain
D5R and D6N Track-Type Tractor Machine Systems Hydraulic Tank - Disassemble
814K Wheel Dozer Machine Systems Operator Platform - Remove and Install
3512E and 3516E Marine Engines Control Cabinet - Assemble
Bench Test Procedure for a 631K and 637K Wheel Tractor Scraper Transmission {0599, 3030, 3073} Bench Test Procedure for a 631K and 637K Wheel Tractor Scraper Transmission {0599, 3030, 3073}
Improved Grease Line in the Front Lines Group Is Now Used on Certain 980M and 982M Wheel Loaders {7510, 7540} Improved Grease Line in the Front Lines Group Is Now Used on Certain 980M and 982M Wheel Loaders {7510, 7540}
973K Track Type Loader Maintenance Interval Schedule
Procedure to Install Grease Line in the Front Lines Group on Certain 980M and 982M Wheel Loaders {7510, 7540} Procedure to Install Grease Line in the Front Lines Group on Certain 980M and 982M Wheel Loaders {7510, 7540}
910K, 910M, 914K, 914M, 918M, and 920K Wheel Loaders Machine System Calibrations, Diagnostic Tests (Cat ET)
Procedure to Rework the Governor and Brake Pedal for Certain D3K2, D4K2, and D5K2 Small Track Type Tractors {4122} Procedure to Rework the Governor and Brake Pedal for Certain D3K2, D4K2, and D5K2 Small Track Type Tractors {4122}
D5R and D6N Track-Type Tractor Machine Systems Hydraulic Tank - Assemble
854K Wheel Dozer Seat Belt Reminder System