2015/04/23 Caterpillar


Improved Panel Assembly Are Now Used On Certain M-Series Medium Wheel Loader Machines {1408, 7301}

Usage:

972M A8P
Wheel Loader:
950M (S/N: EMB1-UP; FTR1-UP)
962M (S/N: EJB1-UP; F2T1-UP)
966MSeries XE (S/N: P6C1-UP)
966M (S/N: DYC1-UP; KJP1-UP)
972MSeries XE (S/N: EDW1-UP)
972M (S/N: A8P1-UP; JPR1-UP)
980M (S/N: KRS1-UP; N8T1-UP)
982M (S/N: F9A1-UP; K1Y1-UP)

Description of Change: An improved Wiper Panel Assembly and HVAC Panel Assembly is now used on certain 950M, 962M, 966M, 972M, 980M, and 982M Medium Wheel Loader machines. When replacing existing operator cab Wiper Panel Assembly and HVAC Panel Assembly, software updates are required for compatibility with Wiper and HVAC Dial inputs. Changes to the Wiper Panel Assembly and HVAC Panel Assembly provide improved service life.

Adaptable To:

Table 1
Required Parts    
Qty.     Former Part Number     New Part Number     Description    
1     390-9712     461-7393     Wiper Panel As.    
1     379-4359     461-7396     HVAC Panel As.    
It is important to replace all the files listed below to maintain compatibility of functions between the ECMs. Use Cat® Electronic Technician (Cat ET) 2014A v1.0 or later. Save the configurations of the ECMs to file using the ECM Replacement feature in Electronic Technician. The new software part number is listed in Table 2.

Table 2
Required Software    
Part Number     Description    
475-1080     Relay Driver Module    

Note: This change was in effect with 464-7732 Machine Software Group. The 464-7732 Machine Software Group has been replaced by 475-1080 Machine Software Group .The improved 461-7393 Panel and 461-7396 Panel are effective in production and are adaptable to the machines listed in Table 3 below.

Table 3
Model     Required Parts     Adaptable to:     Effective With:    
950M     461-7393
461-7396    
S/N:EMB1-343
S/N:FTR1-331    
S/N:EMB344-UP
S/N:FTR332-UP    
962M     461-7393
461-7396    
S/N:EJB1-185
S/N:F2T1-214    
S/N:EJB186-UP
S/N:F2T215-UP    
966M     461-7393
461-7396    
S/N:DYC1-576
S/N:KJP1-839    
S/N:DYC577-UP
S/N:KJP840-UP    
966M XE     461-7393
461-7396    
S/N:P6C1-428     S/N:P6C429-UP    
972M     461-7393
461-7396    
S/N:A8P1-441
S/N:JPR1-423    
S/N:A8P442-UP
S/N:JPR424-UP    
972M XE     461-7393
461-7396    
S/N:EDW1-286     S/N:EDW287-UP    
980M     461-7393
461-7396    
S/N:KRS1-573
S/N:N8T1-390    
S/N:KRS574-UP
S/N:N8T391-UP    
982M     461-7393
461-7396    
S/N:F9A1-232
S/N:K1Y1-375    
S/N:F9A233-UP
S/N:K1Y376-UP    

Caterpillar Information System:

2015/04/15 A Rework Procedure For An Improved Coolant Tank Is Available For All 924H, 924HZ, 928H, and 930H Small Wheel Loaders {1063, 1353, 1354, 1377}
2015/04/15 A Rework Procedure For An Improved Coolant Tank Is Available For All 938H Small Wheel Loaders {1354, 1377, 1380}
A New Coolant Tank Is Now Available For All 924H, 924HZ, 928H and 930H Small Wheel Loaders{1063, 1353, 1354, 1377} A New Coolant Tank Is Now Available For All 924H, 924HZ, 928H and 930H Small Wheel Loaders{1063, 1353, 1354, 1377}
A New Coolant Tank Is Available For ALL 938H Small Wheel Loaders{1354, 1377, 1380} A New Coolant Tank Is Available For ALL 938H Small Wheel Loaders{1354, 1377, 1380}
Procedure to Install A Machine Pitch Inertial Sensor on Certain Series K Wheel Tractor-Scrapers{3288, 5953} Procedure to Install A Machine Pitch Inertial Sensor on Certain Series K Wheel Tractor-Scrapers{3288, 5953}
953K and 963K Track-Type Loader Systems General Information
963K Track-Type Loader Machine Systems Lines (Air Conditioner)
14M3 Motor Grader Machine Systems Flood Lamp
2015/04/22 New Fan Pump Load Sense Hose Assembly Is Now Used on Certain 980H Wheel Loaders {1374, 5057}
963K Track-Type Loader Machine Systems Cab Door - LH
2015/07/17 The Platform Harness Assemblies on Certain D8T Track-Type Tractors Have Been Improved {1408}
953K and 963K Track-Type Loader Systems Electrical Connector - Inspect
Guide Springs and Valve Lifter Assemblies are Breaking in Certain C9 and C9.3 Engines{1108, 1209} Guide Springs and Valve Lifter Assemblies are Breaking in Certain C9 and C9.3 Engines{1108, 1209}
483-5477 Printer Kit Installation on Certain Medium Wheel Loaders {1408, 7490, 7494, 749P, 7610, 7620} 483-5477 Printer Kit Installation on Certain Medium Wheel Loaders {1408, 7490, 7494, 749P, 7610, 7620}
Procedure to Install Printer Kit in the Cab on Certain Medium Wheel Loaders {1408, 7490, 7494, 749P, 7610, 7620} Procedure to Install Printer Kit in the Cab on Certain Medium Wheel Loaders {1408, 7490, 7494, 749P, 7610, 7620}
950H and 962H Wheel Loaders Maintenance Interval Schedule
C15 and C18 Tier 4 Final Engines Diesel Particulate Filter - Clean
2015/04/23 Installation Procedure For A Reversing Fan Is Now Available For Certain D8T Track-Type Tractors {1386, 1387, 138R, 5051, 5057}
2015/06/10 New Sound Suppression Baffle Group is Now Available for Certain H Series and K Series Wheel Tractor-Scrapers {7050, 7051}
Procedure to Install Handrail Extensions on AD30 Underground Articulated Trucks{7256} Procedure to Install Handrail Extensions on AD30 Underground Articulated Trucks{7256}
C15 and C18 Engines for Caterpillar Built Machines Fan Drive
Procedure to Install Handrail Extensions on AD45B Underground Articulated Trucks{7256} Procedure to Install Handrail Extensions on AD45B Underground Articulated Trucks{7256}
953K Track-Type Loader Machine System Cab Enclosure
953K Track-Type Loader Machine System Rollover Protective Structure (ROPS) Mounting
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.