Idlers (Track)
Show/hide table
Illustration 1 | g03677731 |
Typical example |
Show/hide table
Specifications for 202-4296 Track Idler Gp and 206-1897 Track Idler Gp | |||
Item | Qty | Part | Specification Description |
- | - | - | End play for the track roller shaft is: Minimum is Maximum is |
1 | 2 | 320-8917 Duo-Cone Seal Gp | The rubber toric seals and all the contacting surfaces must be clean and dry at assembly. No paint and over spray are not allowed at assembly. Before assembly, apply a thin layer of oil to the contacting surfaces of the metal seal rings. The seal rings must be assembled square. The rubber toric seal should not bulge and the rubber toric seal should not twist. Refer to Special Instruction, SEHS8364, "Assembly and Installation of Conventional Duo-Cone Seals". |
2 | 4 | 6V-9167 Bolt | Torque to |
3 | 2 | 7J-2036 O-Ring Seal | Before assembly, lubricate the bore lightly with lubricant that is being sealed. |
A | - | - | The clear plug must not be recessed below the surface of the stopper. Clear plug can be extended up to |
B | - | - | Installation depth for installing the stopper assembly below the end of the shaft is |
4 | 24 | Bolt | Torque to |
C | - | - | Extension of the shaft from the collar on both sides are |
5 | 2 | 4M-0189 O-Ring Seal | Before assembly, lubricate the shaft lightly with lubricant that is being sealed. |
6 | 2 | 9P-2245 Bushing | Bore after assembly is Installation depth is |
Caterpillar Information System:
990K Wheel Loader Systems Differential
990K Wheel Loader Systems Differential
990K Wheel Loader Systems Main Control Valve
2014/07/15 Improved Rear Camera Mount Now Used on AD45B Underground Articulated Trucks {7348}
2014/09/16 A New Filter Housing Is Now Used on Certain 993K and 994H Wheel Loaders {5068, 5091, 5092}
525D, 535D, 545D and 555D Wheel Skidders Information Display Machine Status Menu
990K Wheel Loader Machine Systems Pressure Tap Locations
2014/06/24 Loss of Daily Reports May Be an Indicator of End of Life for the Product Link® ECM on PL321SR and PL321VSR Systems {7606}
2014/06/06 Troubleshooting SIM Cards on Certain Product Link 522 and 523 for all Cat Products {7606}
844K Wheel Dozer Machine Systems Pilot Oil Accumulator (Dead Engine, Lift Arm Lower) - Test and Charge
525D, 535D, 545D and 555D Wheel Skidders Information Display Service Menu
D6N Track-Type Tractor Transmission Breather - Replace
C4.4 Engines for Caterpillar Built Machines Pressure Sensor (NOx Reduction System)
C4.4 Engines for Caterpillar Built Machines Pressure Sensor (NOx Reduction System) - Differential Pressure Sensor
D6T Track-Type Tractor Systems Idlers (Track)
525D, 535D, 545D and 555D Wheel Skidders Information Display General Information
525D, 535D, 545D and 555D Wheel Skidders Information Display Service Tools
C13, C15, and C18 Tier 4 Final Engines Turbocharger
525D, 535D, 545D and 555D Wheel Skidders Information Display Diagnostic Capabilities
525D, 535D, 545D and 555D Wheel Skidders Information Display Determining Diagnostic Trouble Codes
525D, 535D, 545D and 555D Wheel Skidders Information Display Diagnostic Trouble Codes
826K Landfill Compactor, 825K Soil Compactor and 824K Wheel Dozer Power Train Power Train Guard (Transmission) - Remove and Install
525D, 535D, 545D and 555D Wheel Skidders Information Display Alarm - Test
525D, 535D, 545D and 555D Wheel Skidders Information Display CAN Data Link - Test