Improved Rear Camera Mount Now Used on AD45B Underground Articulated Trucks {7348}
- Underground Articulated Truck:
- AD45B (S/N: CXM1-UP)
Description of Change: An improved rear camera mount is now used. The improved rear camera mount is designed in order to reduce camera vibration.
Adaptable To: The improved rear camera mount is effective in production with, and adaptable to the following machines.
Show/hide table
Machine     | Effective With     | Adaptable To     |
AD45B     | S/N:CXM566-UP     | S/N:CXM1-565     |
Procedure to Install Rear Camera Mount
Show/hide table
Required Parts     | ||
Qty     | Part Number     | Description     |
4     | 197-8679     | Rubber Mount     |
2     | 1S-9593     | Cable Strap     |
1     | 233-1797     | Mount As     |
1     | 453-9474     | Mount As     |
8     | 6V-8185     | Nut     |
1     | 8M-2772     | Clip     |
8     | 8T-4205     | Hard Washer     |
- Remove and retain two lights (1) and camera (2) .
Show/hide table
Illustration 1 | g03677594 |
- Remove and discard mount assembly (3). Retain the bolts and washers for assembly purposes.
Note: Cable straps may require cutting in order to remove rear electrical harness from mount assembly (3) .
- Assemble Item (2) through Item (8) .
Show/hide table
Illustration 2 | g03677592 |
(2) Camera (4) 8M-2772 Clip (5) 6V-8185 Nut (6) 8T-4205 Hard Washer (7) 233-1797 Mount As (8) 197-8679 Rubber Mount |
- Install the assembly, assembled in Step 3 to 453-9474 Mount As (9) using four 6V-8185 Nuts (5) and four 8T-4205 Hard Washers (6) .
Show/hide table
Illustration 3 | g03677598 |
(5) 6V-8185 Nut (6) 8T-4205 Hard Washer (9) 453-9474 Mount As |
- Install the assembly, assembled in Step 4 to the machine using the bolts and washers retained in Step 2.
- Install 1S-9593 Cable Straps as required.
Caterpillar Information System:
2014/09/16 A New Filter Housing Is Now Used on Certain 993K and 994H Wheel Loaders {5068, 5091, 5092}
525D, 535D, 545D and 555D Wheel Skidders Information Display Machine Status Menu
990K Wheel Loader Machine Systems Pressure Tap Locations
2014/06/24 Loss of Daily Reports May Be an Indicator of End of Life for the Product Link® ECM on PL321SR and PL321VSR Systems {7606}
2014/06/06 Troubleshooting SIM Cards on Certain Product Link 522 and 523 for all Cat Products {7606}
844K Wheel Dozer Machine Systems Pilot Oil Accumulator (Dead Engine, Lift Arm Lower) - Test and Charge
525D, 535D, 545D and 555D Wheel Skidders Information Display Service Menu
D6N Track-Type Tractor Transmission Breather - Replace
2014/05/30 An Improved Fuse Panel Group Is Now Used on Certain D6R and D7R Track-Type Tractors {1417, 7499}
525D, 535D, 545D and 555D Wheel Skidders Information Display Totals Menu
Fuel Lines Rework on D10T Tier 3 ATAAC Track-Type Tractors {1261, 1274} Fuel Lines Rework on D10T Tier 3 ATAAC Track-Type Tractors {1261, 1274}
990K Wheel Loader Machine Systems Monitoring System (Steering Functions)
990K Wheel Loader Systems Main Control Valve
990K Wheel Loader Systems Differential
990K Wheel Loader Systems Differential
D6 Track Type Tractor Machine Systems Idlers (Track)
C4.4 Engines for Caterpillar Built Machines Pressure Sensor (NOx Reduction System)
C4.4 Engines for Caterpillar Built Machines Pressure Sensor (NOx Reduction System) - Differential Pressure Sensor
D6T Track-Type Tractor Systems Idlers (Track)
525D, 535D, 545D and 555D Wheel Skidders Information Display General Information
525D, 535D, 545D and 555D Wheel Skidders Information Display Service Tools
C13, C15, and C18 Tier 4 Final Engines Turbocharger
525D, 535D, 545D and 555D Wheel Skidders Information Display Diagnostic Capabilities
525D, 535D, 545D and 555D Wheel Skidders Information Display Determining Diagnostic Trouble Codes