Lift Position Sensor and Mounting (Lift Kickout Control) - Remove and Install
Start By:
- Connect the steering frame lock.
Note: The lift kickout control is located at the rear end of the right lift arm.
- Disconnect harness assembly (4). Remove bolts (1) and remove lift position sensor bracket (3). Note the orientation of the lift position sensor arm and bolt (2) for assembly purposes.
Show/hide table
Illustration 2 g03644377 - Remove yoke (7) and arm (5) from shaft (6). Remove cable strap (9). Remove nuts (8) and the lift position sensor.
Show/hide table
| |
| Illustration 1 | g03644365 |
- Install the lift position sensor in the reverse order of removal.
Caterpillar Information System:
980M and 982M Medium Wheel Loaders Electrical Power Supply - Test
826K Landfill Compactor, 825K Soil Compactor and 824K Wheel Dozer Engine Supplement Fuel Filter Bases and Priming Pump - Remove and Install
D7E Track-Type Tractor Systems Accumulator (Track Tension) - Test and Charge
953K and 963K Track-Type Loaders Plate Locations and Film Locations
953K and 963K Track-Type Loaders Declaration of Conformity
Installation of the 6A Bulldozer on a D6T Track-Type Tractor{6050, 6052, 6060, 6701} Installation of the 6A Bulldozer on a D6T Track-Type Tractor{6050, 6052, 6060, 6701}
980M and 982M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Lines (Diagnostic)
621K, 623K and 627K Wheel Tractor-Scrapers Engine Supplement Diesel Exhaust Fluid Module - Remove and Install - Tractor
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic & Machine Systems Cab - Roof
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic & Machine Systems Cab - Door Right Hand
990K Wheel Loader Sensor Supply - Test
Custom Product Support Literature for the 303-4178 Steel Mill Ar for the 972H Wheel Loaders{0374, 7000} Custom Product Support Literature for the 303-4178 Steel Mill Ar for the 972H Wheel Loaders{0374, 7000}
826K Landfill Compactor, 825K Soil Compactor and 824K Wheel Dozer Engine Supplement Ignition Coil - Remove and Install - Clean Emissions Module
980M and 982M Medium Wheel Loaders Operator Control Switch (Switch to Battery) - Test
980M and 982M Medium Wheel Loaders Parameter - Test
980M and 982M Medium Wheel Loaders Relay - Test
910K and 914K Compact Wheel Loaders Piston and Gear Pump - Remove and Install
980M and 982M Medium Wheel Loaders Sensor Signal (Analog, Active) - Test
953K and 963K Track-Type Loaders Mounting and Dismounting
980M and 982M Medium Wheel Loaders System Schematic
824K Wheel Dozer, 825K Soil Compactor and 826K Landfill Compactor Machine Systems Piston Pump (Brake, Hydraulic Fan)
824K Wheel Dozer, 825K Soil Compactor and 826K Landfill Compactor Machine Systems Piston Pump (Brake, Pilot, Fan)
980M and 982M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Relief Valve
980M and 982M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Counterweight and Mounting