Engine Oil Cooler - Remove and Install
Show/hide table
Hot oil and components can cause personal injury. Do not allow hot oil or components to contact skin. |
- Refer to Operation and Maintenance Manual, "Cooling System Coolant (ELC) - Change" for the correct draining and filling procedures.
- Refer to Operation and Maintenance Manual, "Engine Oil and Filter - Change" for the correct draining and filling procedures.
Show/hide table
Illustration 1 g03577398 - Remove heat shield (1) and disconnect hose assemblies (2).
Show/hide table
Illustration 2 g03577758 - Remove clamp (3) and clamp (7).
- Disconnect tube assembly (4), tube assembly (5), and tube assembly (6).
Show/hide table
Illustration 3 g03578452 - Disconnect harness assembly (8) and remove bolts (9).
Show/hide table
Illustration 4 g03578979 - Disconnect tube assembly (10).
- Remove bolts (12), bolts (10), and exhaust cooler (13).
Show/hide table
Illustration 5 g03579359 - Attach a suitable lifting device to engine oil cooler (15). The engine oil cooler (15) weighs approximately
44 kg (97 lb) . - Remove bolts (14), bolts (16), and engine oil cooler (15).
- Install engine oil cooler (15) in the reverse order of removal.
Caterpillar Information System:
980H Wheel Loader Power Train Fixed Axle (Front) - Remove and Install
986H Wheel Loader Drive Shaft (Rear) - Remove and Install
966M Tier 4, 966M Tier 4 Series XE, 972M Tier 4 and 972M Tier 4 Series XE Wheel Loaders Piston Pump (Steering) - Assemble
966M Tier 4, 966M Tier 4 Series XE, 972M Tier 4 and 972M Tier 4 Series XE Wheel Loaders Piston Pump (Steering) - Disassemble
2014/01/15 An Improvement to the Open Crankcase Ventilation (OCV) Components for Extreme Cold Climates Is Now Available for Certain Machine Engines {1074, 1107}
980H Wheel Loader Power Train Drive Shaft (Center) - Remove and Install
374F and 390F Excavators and 390F MHPU Mobile Hydraulic Power Unit Boom Up Does Not Function
374F and 390F Excavators and 390F MHPU Mobile Hydraulic Power Unit Boom Up (Single Function) Speed Is Slow
D6N Track-Type Tractor Plate Locations and Film Locations
374F and 390F Excavators and 390F MHPU Mobile Hydraulic Power Unit Implement Operation Is Uncontrollable During Travel
374F and 390F Excavators and 390F MHPU Mobile Hydraulic Power Unit Travel Speed Is Slow
D9T Track-Type Tractor Engine Stopping
D6N Track-Type Tractor Declaration of Conformity
374F and 390F Excavators and 390F MHPU Mobile Hydraulic Power Unit Boom Up Does Not Respond To Progressive Joystick Motion
374F and 390F Excavators and 390F MHPU Mobile Hydraulic Power Unit Boom Down (Single Function) Speed Is Slow
374F and 390F Excavators and 390F MHPU Mobile Hydraulic Power Unit Boom Down Does Not Function
D6N Track-Type Tractor Mounting and Dismounting
374F and 390F Excavators and 390F MHPU Mobile Hydraulic Power Unit Boom Down Does Not Respond To Progressive Joystick Motion
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems General Information (HVAC System)
966M and 972M Wheel Loaders Power Train, Steering, Braking, Hydraulic, and Machine Systems Location of Components (HVAC System)
980H Wheel Loader Power Train Oscillating Axle (Rear) - Remove
D6R Track-Type Tractor TA2 Technical Inspection{0372, 1000, 7000, 753T, 7565} D6R Track-Type Tractor TA2 Technical Inspection{0372, 1000, 7000, 753T, 7565}
D6N Track-Type Tractor Daily Inspection
D6N Track-Type Tractor Operator Controls