2013/09/20 Caterpillar


Improved Engine Oil Plugs Are Used on Certain C11 and C13 Engines {1326}

Usage:

R1600G 9YZ
Articulated Truck:
725 (S/N: B1L1-UP)
730 (S/N: B1M1-UP)
730 EJECTOR (S/N: B1W1-UP)
Soil Compactor:
815F (S/N: BKL1-UP)
Excavator:
345BSeries II (S/N: ALB1-UP; CCC1-UP; AGS1-UP; AKX1-UP)
345C (S/N: ESD1-UP; PJW1-UP)
345D (S/N: NEG1-UP; EEH1-UP; RAJ1-UP; LKY1-UP)
349D (S/N: NNF1-UP; MEN1-UP)
349E (S/N: DGE1-UP; TFG1-UP; KCN1-UP; MPZ1-UP)
365B (S/N: AGD1-UP)
365BLSeries II (S/N: JMB1-UP; DER1-UP)
Load Haul Dump:
R1300G (S/N: LJB1-UP)
R1600G (S/N: 9YZ1-UP)
R1700G (S/N: SBR1-UP)
Motor Grader:
140H (S/N: CCA1-UP; APM1-UP)
143H (S/N: APN1-UP)
14H (S/N: ASE1-UP)
14M (S/N: B9J1-UP; R9J1-UP)
160H (S/N: ASD1-UP)
163H (S/N: ARL1-UP)
16MSeries 3 (S/N: N9Y1-UP)
16M (S/N: B9H1-UP; R9H1-UP)
Reclaimer Mixer:
RM-300 (S/N: BWR1-UP)
Track-Type Tractor:
D7RSeries II (S/N: AEC1-UP; BRM1-UP)
Wheel Loader:
966GSeries II (S/N: AXJ1-UP; AXL1-UP; ANT1-UP; ANZ1-UP)
966H (S/N: A6D1-UP; RYF1-UP; A6G1-UP; A6J1-UP; TAL1-UP)
972GSeries II (S/N: AXC1-UP; AXE1-UP; AWP1-UP; AXP1-UP; ANY1-UP)
972H (S/N: GTA1-UP; A7D1-UP; A7G1-UP; A7J1-UP)
980K (S/N: W7K1-UP; GTZ1-UP)
Service Magazine SEPD1665, 16 September 2013, "Improved Engine Oil Plugs Are Used on Certain C11 and C13 Engines". The original article was revised to change effective serial numbers.

Description of Change: The improved engine oil plug adds a center rib to increase compression for a tighter fit.

Adaptable To: The improvement has been made to the 209-7309 Plug .

The 209-7309 Plug is adaptable to the above engines back to first production.




Illustration 1g03397534

(1) Old 209-7309 Plug

(2) New 209-7309 Plug

The effective engine serial numbers are listed in Table 1.

Table 1
Effective Engine Serial Number    
S/N:TXE08939-UP    
S/N:TXF05082-UP    
S/N:TXM05357-UP    

Caterpillar Information System:

374F and 390F Excavators and 390F MHPU Mobile Hydraulic Power Unit Alarm - Test
2013/10/10 An Improved Retaining Ring Is Now Available for Machines Equipped with ELRT Transmission Control Valves {3083, 3157}
Procedure to Return the Fuel Filter for Certain Caterpillar Equipment{1260, 1261, 1274} Procedure to Return the Fuel Filter for Certain Caterpillar Equipment{1260, 1261, 1274}
901C, 902C and 903C Compact Wheel Loaders Machine Systems Quick Coupler - Remove and Install
2013/11/21 New Cushion Hitch Return Lines are Now Available on Certain 621H, 623H, and 627H Wheel Tractor-Scrapers {5057}
980H Wheel Loader Machine Systems Cab - Remove and Install
844K Wheel Dozer Automatic Lubrication Grease Tank - Fill - If Equipped
2013/10/23 New Expansion Tank Group Is Now Used on Certain Pipelayers and Track-Type Tractors {1350, 1353}
901C, 902C and 903C Compact Wheel Loaders Machine Systems Bottom Guard - Remove and Install
986H Wheel Loader Machine Systems Electronic Control (Brake, Hydraulic Fan System)
950 GC Wheel Loader Steering System Piston Pump (Steering)
988K XE Wheel Loader Machine Systems Evaporator Coil and Heater Coil - Remove and Install
950 GC Wheel Loader Steering System Secondary Steering System (HMU Steering)
621K, 623K, and 627K Wheel Tractor-Scrapers Systems General Information (HVAC System)
374F Excavator Machine Systems Hydraulic System Warm-Up
901C, 902C and 903C Compact Wheel Loaders Machine Systems Tilt Cylinder - Remove and Install
D3K, D4K and D5K Track-Type Tractors Electrohydraulic Power Train System Piston Pump (Hydrostatic)
D3K, D4K and D5K Track-Type Tractors Electrohydraulic Power Train System Parking Brake
374F Excavator Counterweight Removal and Installation
2014/01/07 Heavy Duty Track Link Has Been Improved on Certain D6 Track-Type Tractors {4169, 4171}
3500 and 3500B High Displacement Engines for Caterpillar Built Machines Vibration Damper - Remove and Install
990K Wheel Loader and 844K Wheel Dozer Machine Systems Electrohydraulic Control (Joystick) - Remove and Install
H75E, H75E S, H95E S and H95 Hydraulic Hammers Low Pressure Nitrogen (Valve Body) - Test and Charge
CX31-P600 Petroleum Transmission Transmission Warm-up
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.