Illustration 1 | g01948695 |
Bottom view |
(1) Torque for the bolts ... 30 ± 4 N·m (266 ± 35 lb in)
(2) Torque for the plug assembly ... 8.5 ± 0.5 N·m (75.2 ± 4.4 lb in)
Illustration 2 | g01948696 |
Left side view |
(3) Torque for the bolts ... 28 ± 7 N·m (248 ± 62 lb in)
(4) Torque for four screws ... 1.70 ± 0.25 N·m (15.05 ± 2.21 lb in)
(5) Insert the speed sensor group until firm contact with the cylinder has been made. After contact, retract the speed sensor group 1/2 ± 1/8 turn. Torque for the speed sensor group ... 37 ± 4 N·m (27 ± 3 lb ft)
(6) Lubricate the bore of five O-ring seals lightly with the lubricant that is being sealed.
(7) Torque for two temperature sensors ... 20 ± 3 N·m (177 ± 27 lb in)
(8) Torque for the fitting ... 24 ± 3 N·m (212 ± 27 lb in)
Note: Lubricate the bore of the flow control valve assemblies (9) lightly with the lubricant that is being sealed.
(9) Torque for two flow control valve assemblies ... 48 ± 3 N·m (35 ± 2 lb ft)