Illustration 1 | g01948726 |
Bottom view |
(1) Torque for the bolts ... 30 ± 4 N·m (266 ± 35 lb in)
(2) Torque for the plug assembly ... 8.5 ± 0.5 N·m (75.2 ± 4.4 lb in)
Illustration 2 | g01948713 |
Left side view |
(3) Lubricate the bore of five O-ring seals lightly with the lubricant that is being sealed.
(4) Torque for the bolts ... 28 ± 7 N·m (248 ± 62 lb in)
(5) Torque for four screws ... 1.70 ± 0.25 N·m (15.05 ± 2.21 lb in)
(6) Torque for the speed sensor group ... 37 ± 4 N·m (27 ± 3 lb ft)
(7) Torque for the transmission harness assembly ... 12 ± 3 N·m (106 ± 27 lb in)
(8) Torque for two temperature sensors ... 20 ± 3 N·m (177 ± 27 lb in)
(9) Torque for the fitting ... 24 ± 3 N·m (212 ± 27 lb in)
Note: Lubricate the bore of the flow control valve assemblies (10) lightly with the lubricant that is being sealed.
(10) Torque for two flow control valve assemblies ... 48 ± 3 N·m (35 ± 2 lb ft)
(11) Torque for two shoulder screws ... 15 ± 3 N·m (133 ± 27 lb in)
(12) Torque for the wire assembly ... 20 ± 3 N·m (177 ± 27 lb in)