Parking Brake - Manual Release
Show/hide table
Personal injury or death can result from a brake malfunction. Do not operate the machine if the parking brake was engaged due to a malfunction of the hydraulic oil system or the service brakes. Correct any problem before attempting to operate the machine. |
Show/hide table
NOTICE |
---|
Before you operate the machine, and after the parking brake has been serviced, be sure you adjust the parking brake mechanism. Failure to do so could damage the parking brake components or prevent the parking brake from functioning correctly. |
Test Preparation
ReferenceTesting and Adjusting, "Parking Brake - Test".
- Chock the wheels in order to keep the machine from rolling when the parking brake is disengaged.
- Connect the steering frame lock to the front and rear frames.
Show/hide table
Illustration 1 | g02936756 |
Steering frame lock in the locked position. |
Adjust Procedure
- Loosen locknut (2) down rod (3) to a length of 19 mm (0.75 inch). Turn rod end (3) until the rod moves out enough to disengage the parking brake.
Show/hide table
Illustration 2 | g03421049 |
Actuator for the Parking Brake Typical Example (1) Actuator shaft (2) Locknut (3) Rod end |
Caterpillar Information System:
980H Wheel Loader Braking System Parking Brake - Test
988K XE Wheel Loader Machine Systems Lift Cylinder - Remove and Install
966M and 972M Wheel Loaders Secondary Steering - Test
980H Wheel Loader Braking System Parking Brake System Pressure - Test
966M and 972M Wheel Loaders Steering Cylinder Bearings - Lubricate
980H Wheel Loader Engine Supplement Engine Oil Filter and Oil Filter Base - Remove and Install
980H Wheel Loader Braking System Service Brake Wear Indicator - Check
836K Landfill Compactor, 834K Wheel Dozer and 988K Wheel Loader C18 Engine Supplement Hood - Remove and Install
980H Wheel Loader Electrohydraulic System Control Valve (Auxiliary)
980H Wheel Loader Engine Supplement Engine Oil Cooler - Remove and Install
966M and 972M Wheel Loaders Transmission Oil - Change
980H Wheel Loader Braking System Brake System Air - Purge
980H Wheel Loader Braking System Parking Brake Control Cable - Adjust
980H Wheel Loader Braking System Parking Brake Actuator - Adjust
2013/09/27 New Alternator Guard Now Used on AD30 Underground Articulated Trucks {7154}
2013/09/27 New Alternator Guard Now Used on AD45B and Certain AD55 Underground Articulated Trucks {7154}
980H Wheel Loader Electrohydraulic System Main Control Valve and Mounting - Block Handling
980H Wheel Loader Electrohydraulic System Main Control Valve and Mounting
D5N Track-Type Tractor TA2 Technical Inspection{0372, 1000, 7000, 753T, 7565} D5N Track-Type Tractor TA2 Technical Inspection{0372, 1000, 7000, 753T, 7565}
980H Wheel Loader Steering System Steering Cylinder and Mounting
980H Wheel Loader Steering System Steering Lines
980H Wheel Loader Electrohydraulic System Pressure Sensor (Lift Cylinder Oil) (Autodig, Payload)
980H Wheel Loader Steering System Wiring - secondary steering
980H Wheel Loader Electrohydraulic System Oil Filter (Hydraulic)