993K Wheel Loader Machine Systems Caterpillar


Refrigerant Accumulator - Remove and Install

Usage:

993K Z4D

Removal Procedure

------ WARNING! ------

Personal injury can result from contact with refrigerant.

Contact with refrigerant can cause frost bite. Keep face and hands away to help prevent injury.

Protective goggles must always be worn when refrigerant lines are opened, even if the gauges indicate the system is empty of refrigerant.

Always use precaution when a fitting is removed. Slowly loosen the fitting. If the system is still under pressure, release it slowly in a well ventilated area.

Personal injury or death can result from inhaling refrigerant through a lit cigarette.

Inhaling air conditioner refrigerant gas through a lit cigarette or other smoking method or inhaling fumes released from a flame contacting air conditioner refrigerant gas, can cause bodily harm or death.

Do not smoke when servicing air conditioners or wherever refrigerant gas may be present.

Use a certified recovery and recycling cart to properly remove the refrigerant from the air conditioning system.




    Illustration 1g03238461

  1. Remove panel assembly (1).

  2. Recover the air conditioner refrigerant from the air conditioner system. Refer to Service Manual, SENR5664, "Air Conditioning and Heating Systems with R-134a Refrigerant" for the procedure. Refer to Special Publication, NENG2500, "Air Conditioning Tools" for the tools.


    Illustration 2g03238497

  3. Disconnect hose assembly (2). Disconnect clamps (3) and remove refrigerant accumulator (4).

Installation Procedure

  1. Install refrigerant accumulator (4) in the reverse order of removal.

Caterpillar Information System:

390F MHPU Mobile Hydraulic Power Unit Hydraulic System Oil Sample - Obtain
390F MHPU Mobile Hydraulic Power Unit Hydraulic System Oil Level - Check
390F MHPU Mobile Hydraulic Power Unit Hydraulic System Oil Filter (Return) - Replace
D11T Track-Type Tractor TA2 Technical Inspection {0372, 1000, 7000, 753T, 7565} D11T Track-Type Tractor TA2 Technical Inspection {0372, 1000, 7000, 753T, 7565}
390F MHPU Mobile Hydraulic Power Unit Hydraulic System Oil Filter (Pilot) - Replace
390F MHPU Mobile Hydraulic Power Unit Hydraulic System Oil Filter (Case Drain) - Replace
390F MHPU Mobile Hydraulic Power Unit Hydraulic System Oil - Change
Alternator - Bosch K1/N1 Normal Operation
A Different Seal is Needed if The Servo Cylinder Seal Kit is Used On Certain Wheel Tractor-Scrapers{4315} A Different Seal is Needed if The Servo Cylinder Seal Kit is Used On Certain Wheel Tractor-Scrapers{4315}
2012/09/20 A New Torque Is Now Used for the Retainer Plug and Seal on the Implement Control Valve {5051}
Alternator - Bosch K1/N1 Component Description
312D2 and 313D2 Excavators Machine System Specifications Oil Filter (Return)
2013/04/05 Communication Adapter III (CA3) Is Now Used for Tier 4 Interim and Newer Machine Engines {108D, 1926}
621K, 623K, and 627K Wheel Tractor-Scrapers Systems General Information (Power Train System)
390F Excavator Declaration of Conformity
C32 Auxiliary Engine Engine Operation with Intermittent Diagnostic Codes
993K Wheel Loader Machine Systems Refrigerant Receiver-Dryer - Remove and Install
2012/11/12 A New Retention Plate for the Left Hand Fender Group is Now Used on Certain 621H, 623H and 627H Wheel Tractor-Scrapers {7252}
Electronic Control Module (ECM) on Certain C7.1, C6.6 and C4.4 Machine Engines{1901, 1920} Electronic Control Module (ECM) on Certain C7.1, C6.6 and C4.4 Machine Engines{1901, 1920}
D8R Track-Type Tractor Maintenance Interval Schedule
D3K2, D4K2, D5K2 Track-Type Tractor TA2 Technical Inspection{1000, 7000, 753T, 7542} D3K2, D4K2, D5K2 Track-Type Tractor TA2 Technical Inspection{1000, 7000, 753T, 7542}
910K and 914K Compact Wheel Loaders Plate Locations and Film Locations
349F and 352F Excavators Fuses - Replace
986H Wheel Loader Speed Sensor - Test
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.