Hydraulic System Oil Sample - Obtain
Catatan: Jika oli hidraulik Cat HYDO Advanced digunakan, interval penggantian oli hidraulik diperpanjang hingga 6000 jam. Servis S·O·S setelah 3000 jam sangat Disarankan. Hubungi dealer Cat Anda untuk mengetahui perinciannya.
Show/hide table
| |
| Ilustrasi 1 | g03512698 |
Katup pengambilan sampel oli hidraulik berada di kompartemen akses belakang di sisi kanan alat berat. Dapatkan sampel oli hidraulik dari katup pengambilan sampel oli hidraulik. Rujuk ke Publikasi Khusus, SEBU6250, "S·O·S Oil Analysis" untuk informasi tentang pengambilan sampel oli hidraulik. Lihat Publikasi Khusus, PEGJ0047, "How To Take A Good Oil Sample" untuk informasi lebih lanjut tentang cara mendapatkan sampel oli hidraulik.
Caterpillar Information System:
390F MHPU Mobile Hydraulic Power Unit Hydraulic System Oil Level - Check
390F MHPU Mobile Hydraulic Power Unit Hydraulic System Oil Filter (Return) - Replace
D11T Track-Type Tractor TA2 Technical Inspection {0372, 1000, 7000, 753T, 7565} D11T Track-Type Tractor TA2 Technical Inspection {0372, 1000, 7000, 753T, 7565}
390F MHPU Mobile Hydraulic Power Unit Hydraulic System Oil Filter (Pilot) - Replace
390F MHPU Mobile Hydraulic Power Unit Hydraulic System Oil Filter (Case Drain) - Replace
390F MHPU Mobile Hydraulic Power Unit Hydraulic System Oil - Change
Alternator - Bosch K1/N1 Normal Operation
A Different Seal is Needed if The Servo Cylinder Seal Kit is Used On Certain Wheel Tractor-Scrapers{4315} A Different Seal is Needed if The Servo Cylinder Seal Kit is Used On Certain Wheel Tractor-Scrapers{4315}
2012/09/20 A New Torque Is Now Used for the Retainer Plug and Seal on the Implement Control Valve {5051}
Alternator - Bosch K1/N1 Component Description
312D2 and 313D2 Excavators Machine System Specifications Oil Filter (Return)
312D2 and 313D2 Excavators Machine System Specifications Stick - 2.5 m (8.20 ft)
993K Wheel Loader Machine Systems Refrigerant Accumulator - Remove and Install
2013/04/05 Communication Adapter III (CA3) Is Now Used for Tier 4 Interim and Newer Machine Engines {108D, 1926}
621K, 623K, and 627K Wheel Tractor-Scrapers Systems General Information (Power Train System)
390F Excavator Declaration of Conformity
C32 Auxiliary Engine Engine Operation with Intermittent Diagnostic Codes
993K Wheel Loader Machine Systems Refrigerant Receiver-Dryer - Remove and Install
2012/11/12 A New Retention Plate for the Left Hand Fender Group is Now Used on Certain 621H, 623H and 627H Wheel Tractor-Scrapers {7252}
Electronic Control Module (ECM) on Certain C7.1, C6.6 and C4.4 Machine Engines{1901, 1920} Electronic Control Module (ECM) on Certain C7.1, C6.6 and C4.4 Machine Engines{1901, 1920}
D8R Track-Type Tractor Maintenance Interval Schedule
D3K2, D4K2, D5K2 Track-Type Tractor TA2 Technical Inspection{1000, 7000, 753T, 7542} D3K2, D4K2, D5K2 Track-Type Tractor TA2 Technical Inspection{1000, 7000, 753T, 7542}
910K and 914K Compact Wheel Loaders Plate Locations and Film Locations
349F and 352F Excavators Fuses - Replace