Piston Pump (Brake, Differential Lock, Hydraulic Fan) - Assemble
- Pasang seal (31) dan ring penahan (30).
Show/hide table
Ilustrasi 2 g02663074 - Pasang bearing cup (27), selubung bearing (25), sekrup (26), pegas (28), dan seal O-ring (29).
Show/hide table
Ilustrasi 3 g02667537 - Pasang kerucut bearing (24) pada rakitan poros (23).
Show/hide table
Ilustrasi 4 g02663072 Show/hide table
Ilustrasi 5 g02663071 - Tempatkan rakitan poros (23) melalui swashplate (22). Pasang swashplate (22) dan rakitan poros (23) sebagai satu unit.
- Pasang batang (21).
Show/hide table
Ilustrasi 6 g02663070 - Pasang piston (20).
Show/hide table
Ilustrasi 7 g02663069 - Pasang sumbat (19).
Show/hide table
Ilustrasi 8 g02663068 - Pasang tiga pin tekanan (18).
Show/hide table
Ilustrasi 9 g02663067 Show/hide table
Ilustrasi 10 g02663066 Show/hide table
Ilustrasi 11 g02663065 Show/hide table
Perakitan komponen yang tidak sesuai dengan pembebanan pegas dapat menyebabkan cedera badan.
Untuk mencegah kemungkinan cedera, ikuti prosedur perakitan yang ditetapkan dan kenakan alat pelindung diri.
- Pasang ring (17), pegas (16), dan ring penahan (15). Gunakan Peralatan (A), ring yang sesuai (14), dan pres yang sesuai untuk mengkompresi pegas (16).
- Pasang ring penahan (15).
Show/hide table
Ilustrasi 12 g02663064 - Pasang penahan (13).
Show/hide table
Ilustrasi 13 g02663063 Show/hide table
Ilustrasi 14 g02663062 - Pasang rakitan piston (12) pada pelat (11).
- Pasang pelat (11) dan rakitan piston (12) sebagai satu unit.
Show/hide table
Ilustrasi 15 g02663061 - Pasang grup berputar (10).
Show/hide table
Ilustrasi 16 g02663060 Show/hide table
Ilustrasi 17 g02663059 - Pasang spacer (9) dan kerucut bearing (8).
Show/hide table
Ilustrasi 18 g02663058 - Pasang bearing cup (7) pada pelat port (6). Pasang seal O-ring (5).
Show/hide table
Ilustrasi 19 g02663057 Show/hide table
Ilustrasi 20 g02663036 - Atur posisi kepala (1) dan pasang baut (2).
- Atur posisi rakitan katup (4) dan pasang baut (3).
Show/hide table
| |
| Ilustrasi 1 | g02663076 |
Diakhiri dengan:
- Pasang pompa piston (rem, pengunci diferensial, kipas hidraulik).
Caterpillar Information System:
854K Wheel Dozer Electrohydraulic System Machine Preparation for Troubleshooting
992K Wheel Loader Electrohydraulic System Breaker Relief Valve - European Union
621H, 623H and 627H Wheel Tractor-Scrapers Engine Supplement Transmission Oil Cooler - Remove and Install - Tractor
Correct Combinations of Connecting Rods Allowed in Remanufactured Cylinder Packs for Certain C13 Engines{1218, 1225, 1239} Correct Combinations of Connecting Rods Allowed in Remanufactured Cylinder Packs for Certain C13 Engines{1218, 1225, 1239}
D6N Track-Type Tractor MID 039 - CID 1884 - FMI 05
D6N Track-Type Tractor MID 039 - CID 1884 - FMI 03
854K Wheel Dozer and 992K Wheel Loader Power Train Connector Locations
C4.4 Engines for Caterpillar Built Machines Gear Group - Inspect
C4.4 Engines for Caterpillar Built Machines Crankshaft Pulley - Check
924K, 930K and 938K Wheel Loaders Electrohydraulic System Gear Motor (Hydraulic Fan)
C4.4 Engines for Caterpillar Built Machines Connecting Rod - Inspect
854K Wheel Dozer Electrohydraulic System Main Control Valve
854K Wheel Dozer Electrohydraulic System Visual Inspection
D3G, D4G and D5G Track-Type Tractors Electrohydraulic Power Train Systems Worksheets - Troubleshoot
854K Wheel Dozer Electrohydraulic System Hydraulic System Troubleshooting
D11T Track-Type Tractor Hydraulic System Oil Filters - Replace
924K, 930K and 938K Wheel Loaders Steering Frame Lock - Separate and Connect
2011/08/25 A New Alternator Debris Guard and Filter Are Available for Certain Medium Wheel Loaders {1054, 1405, 1405}
621H, 623H and 627H Wheel Tractor-Scrapers Power Train Axle Shaft - Remove and Install
621H, 623H and 627H Wheel Tractor-Scrapers Machine Systems Piston Pump (Implement) - Disassemble
621H, 623H and 627H Wheel Tractor-Scrapers Machine Systems Piston Pump (Implement) - Assemble
992K Wheel Loader Fuel System - Prime
3500 Industrial Engines Fuel Priming Pump
950K Wheel Loader and 962K Wheel Loader Power Train Limited Slip Differential