Machine Preparation for Troubleshooting
Show/hide table
 |
When testing and adjusting the transmission and power train, move the machine to an area clear of obstructions, with safe exhaust ventilation for the exhausts. Sudden movement of the machine or release of oil under pressure can cause injury to persons on or near the machine. To prevent possible injury, do the procedure that follows before testing and adjusting the transmission and power train. |
 |
- Move the machine to a smooth, horizontal surface. Move the machine away from any machines that are in operation. Move the machine away from other personnel.
- Permit only one operator on the machine at one time. A service person may be in the area in order to instruct the operator. Check that all other personnel are away from the machine at all times.
- Turn off the cushion-hitch. Make sure that the rear bracket assembly rests on the front hitch assembly.
- Activate the parking brake. Lower the scraper bowl to the ground. Lower the apron (if equipped). Lower the bail (if equipped). Turn off the engine or engines. Turn the key switch to the ON position and wait for two seconds.
- Move the joystick control to all positions in order to relieve the pressure in the hydraulic system. Turn the keyswitch to the OFF position.
- Make sure that the rotary actuator for the tractor is in the NEUTRAL position. Also, make sure that the selector shaft for the scraper transmission is in the NEUTRAL position.
Caterpillar Information System:
621H, 623H and 627H Wheel Tractor-Scrapers Machine Systems General Troubleshooting Information
2011/09/12 A New Gasket and a New Spacer Plate are Now Used on Certain Reman 3500 Engines {1100, 1201, 7555}
D6K2 Track-Type Tractor Engine Air Filter Primary Element - Clean/Replace
D6K2 Track-Type Tractor Cooling System Level - Check
Installation Procedure for Lift Kickout Control On Certain Track-Type Loaders{5109} Installation Procedure for Lift Kickout Control On Certain Track-Type Loaders{5109}
D6K2 Track-Type Tractor Cooling System Coolant Sample (Level 2) - Obtain
950K and 962K Wheel Loaders Electrohydraulic System System Schematic
623H Wheel Tractor-Scraper Rated Load
D6K2 Track-Type Tractor Cooling System Coolant Sample (Level 1) - Obtain
D8T Track-Type Tractor Hydraulic System General Information (Fan Hydraulic System)
966K Wheel Loader Transmission Oil Level - Check
D6K2 Track-Type Tractor Cooling System Coolant Extender (ELC) - Add
992K Wheel Loader Declaration of Conformity
854K Wheel Dozer Declaration of Conformity
621H, 623H and 627H Wheel Tractor-Scrapers Machine Systems Visual Inspection
992K Wheel Loader and 854K Wheel Dozer Braking System Brake Accumulator
D6K2 Track-Type Tractor Engine Air Filter Secondary Element - Replace
992K Wheel Loader and 854K Wheel Dozer Braking System General Information (Brake)
992K Wheel Loader and 854K Wheel Dozer Braking System Electronic System Components
D6K2 Track-Type Tractor Engine Air Precleaner - Clean
992K Wheel Loader and 854K Wheel Dozer Braking System Piston Pump (Brake)
992K Wheel Loader and 854K Wheel Dozer Braking System High Pressure Screen Group (Deluxe Filtration)
992K Wheel Loader and 854K Wheel Dozer Braking System Brake Control Valve (Service)
Installation of Window Seals on Caterpillar Products With a Cab{7308} Installation of Window Seals on Caterpillar Products With a Cab{7308}