MID 039 - CID 1198 - FMI 13
Conditions Which Generate This Code:
This diagnostic code is recorded when the Machine ECM determines that the blade raise solenoid requires calibration. This diagnostic code will only appear when the Machine ECM has been replaced or new software has been flashed into the Machine ECM.
Test Step 1. CALIBRATE THE SOLENOID
- Perform the calibration procedure for the solenoid. Refer to Testing and Adjusting, UENR0057, "Implement Solenoid Valve - Calibrate" procedure.
Expected Result:
The solenoid calibration procedure was performed successfully.
Results:
- YES - The solenoid calibration procedure was performed successfully. Resume normal machine operation.STOP
- NO - The calibration procedure for the solenoid was not performed successfully.
Repair: Repeat the calibration procedure for the solenoid. Refer to Testing and Adjusting, UENR0057, "Implement Solenoid Valve - Calibrate" procedure.
STOP
Caterpillar Information System:
992K Wheel Loader Cooling System Coolant Extender (ELC) - Add
D6N Track-Type Tractor MID 039 - CID 1197 - FMI 13
D6N Track-Type Tractor MID 039 - CID 1251 - FMI 04
D6N Track-Type Tractor MID 039 - CID 1326 - FMI 02
D6N Track-Type Tractor MID 039 - CID 0041 - FMI 03
D6N Track-Type Tractor MID 039 - CID 1198 - FMI 03
D6N Track-Type Tractor MID 039 - CID 1198 - FMI 05
D6N Track-Type Tractor MID 039 - CID 1198 - FMI 06
D6N Track-Type Tractor MID 039 - CID 2596 - FMI 03
D6N Track-Type Tractor MID 039 - CID 2596 - FMI 05
D6N Track-Type Tractor MID 039 - CID 2596 - FMI 06
D6N Track-Type Tractor MID 039 - CID 2659 - FMI 02
D6N Track-Type Tractor MID 039 - CID 0672 - FMI 02
D6N Track-Type Tractor MID 039 - CID 0590 - FMI 14
D6N Track-Type Tractor MID 039 - CID 2212 - FMI 04
D3K2, D4K2 and D5K2 Track-Type Tractors Power Train Track Carrier Roller
992K Wheel Loader Cooling System Coolant Level - Check
621H, 623H and 627H Wheel Tractor-Scrapers Implement Electronic Control System General Information
621H, 623H and 627H Wheel Tractor-Scrapers Implement Electronic Control System Automatic Return Function for the Ejector Does Not Operate
2011/08/25 New Seat Now Used on AD30 Underground Articulated Truck {7312, 7324}
374F Excavator Machine System Hydraulic Pedal Control (Auxiliary)
3500 Engines Turbocharger
C3.4B Industrial Engine Fuel System Secondary Filter - Replace
2011/06/10 Procedure for Releasing Stuck Buttons Due to Rapid Altitude Changes for Certain Advisor Displays {7490}