Improved Angle Cylinder Now Used on Certain D6N Track Type Tractors {5101}
- Track-Type Tractor:
- D6N (S/N: DJY1-UP; GHS1-UP; DJA1-UP; JAH1-UP; LJR1-UP; MLW1-UP)
Description of Change: A new angle cylinder with an improved rod and piston joint using a threaded rod and locknut is now available for the D6N.
Adaptable To: The new 358-6503 Angling Cylinder Gp replaces the former 321-7048 Angling Cylinder Gp which is part of the 338-3522 Power Angling C-Frame Gp and the 338-3521 Power Angling C-Frame Gp .
The new angle cylinder is adaptable to the machines DJY1-1741, GHS1-260, GHS262-658, DJA1-1202, JAH1-368, LJR1-239, LJR241-254, LJR256-278, LJR284-291, LJR296-308, LJR315-320, and MLW1-341.
The new angle cylinders are effective in production with machines GHS659-UP, LJR321-UP, and MLW342-UP.
Show/hide table
| Required Parts List | ||
| QTY | Part Number | Description |
| 1 | 358-6503 | Angling Cylinder Gp |
| 2 | 309-6944 | Hydraulic Oil |
Note: Lubricate sealing lip lightly with the lubricant being sealed.
Caterpillar Information System:
950K and 962K Wheel Loaders Automatic Lubrication Grease Tank - Fill - Autolube - If Equipped
PL83 and PL87 Pipelayer Systems Track - Adjust
966M and 972M Wheel Loaders Stopping the Machine
D7E Track-Type Tractor Hydraulic, HVAC and Electrical Systems Accumulator (Pilot) - Test and Charge
966M and 972M Wheel Loaders Operator Station
966M and 972M Wheel Loaders Work Tools
966M and 972M Wheel Loaders Operation
541 Series 2 and 552 Series 2 Track Feller Bunchers Fire Extinguisher Location
992K Wheel Loader Machine Systems Window Wiper and Wiper Motor (Rear) - Remove and Install
D9T Track-Type Tractor Power Train Brake Pressure - Test
C9.3 Marine Generator Set Engines Cooling System - Inspect
C13 Industrial Engine Engine Air Cleaner Element (Single Element/Canister Type) - Clean/Replace - If Equipped
C4.4 Industrial Engine Atmospheric Pressure Sensor
C4.4 Industrial Engine Electronic Control Module
950K and 962K Wheel Loaders Radiator Core - Clean
621H, 623H and 627H Wheel Tractor-Scrapers Hydraulic and Steering System General Information
C11 and C13 Industrial Engines Engine Oil Level - Check
C9.3 Engines for Caterpillar Built Machines Engine Shutdown Occurs Intermittently
D8T Track-Type Tractor Hydraulic System Bank Valve (Five)
C9.3 Engines for Caterpillar Built Machines Exhaust System Contains Oil
C9.3 Engines for Caterpillar Built Machines ECM - Replace
D9T Track-Type Tractor Systems Torque Converter and Housing
2011/03/03 Hydraulic Oil Additive Reduces Noise on Certain Wheel Loaders Machines {5095, 5095}
D3K2, D4K2 and D5K2 Track-Type Tractors Operator Controls