The Product Identification Number (PIN) will be used to identify a powered machine that is designed for an operator to ride.
Caterpillar products such as engines, transmissions, and major attachments that are not designed for an operator to ride are identified by Serial Numbers.
For quick reference, record the identification numbers in the spaces that are provided below the illustration.
Illustration 1 | g02448218 |
Illustration 2 | g02448364 |
The plate for Machine PIN (1) is located to the left of the case on the rear of the machine. The second plate for Machine PIN (1) is located on the left side of the radiator guard on the front of the machine.
Machine PIN (1)____________________
CE Plate (2)____________________
Year of Manufacture (If required) (3)____________________
Country of Origin (4)____________________
The Engine Serial Number Plate is located on the left side of the engine block directly behind the dip stick tube.
Illustration 3 | g02790071 |
Illustration 4 | g01274351 |
Engine Serial Number ____________________
The serial number plate for the ripper is located on the side of the ripper.
Illustration 5 | g01256144 |
Illustration 6 | g01057104 |
Ripper Serial Number ____________________
The serial number plate for the winch is located on the side of the winch.
Illustration 7 | g01256165 |
Illustration 8 | g01323812 |
The winch serial number is located on the right vertical wall of the winch frame. Do not operate or service the winch unless your first read the Operation and Maintenance Manual with understanding the instructions for the safe operation of the winch.
Winch Serial Number ____________________
Model ____________________
The message is positioned on the outside left canopy.
Illustration 9 | g02448310 |
Structural damage, an overturn, modification, alteration, or improper repair, can impair this structure's protective capability thereby voiding this certification. Do not weld on or drill holes in the structure. Consult a Caterpillar dealer to determine this structure's limitations without voiding its certification. |
This machine has been certified to the standards that are listed on the certification plate. The maximum mass of the machine, which includes the operator and the attachments without payload, should not exceed the mass on the certification plate.
A typical example of the certification film is shown above.
Refer to Operation and Maintenance Manual, "Guards (Operator Protection)" for more information.
Illustration 10 | g00933634 |
A typical example of this film is shown. Your machine may have a different value. |
If equipped, the certification film is used to verify the environmental sound certification of the machine. The value that is listed on the film indicates the guaranteed sound power level. The guaranteed sound power level is measured at the time of manufacture. The guaranteed sound power level is measured according to the conditions that are specified in "2000/14/EC".
The machines are compliant to "2006/42/EC". The CE plate is positioned on the bottom left side of the Machine PIN (1) at the rear of the machine.
Illustration 11 | g01883459 |
For quick reference, record this information in the spaces that are provided below.
Illustration 12 | g02019094 |
- Engine Power of primary engine (kW)____________________
- Engine Power for additional engine (kW) (if equipped) ____________________
- Typical operating weight of machine for European market (kg)____________________
- Year of construction____________________
- Machine Type____________________
For the name, the address and the country of origin for the manufacturer, see the PIN plate.