D6N Track-Type Tractor Caterpillar


Fuel System Primary Filter/Water Separator - Drain

Usage:

D6N LGP PBA

------ WARNING! ------

Fuel leaked or spilled onto hot surfaces or electrical components can cause a fire. To help prevent possible injury, turn the start switch off when changing fuel filters or water separator elements. Clean up fuel spills immediately.



NOTICE

Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.

Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products.

Dispose of all fluids according to local regulations and mandates.




    Illustration 1g03535838

  1. Open the left engine access door.


    Illustration 2g02811457

  2. Place a suitable container directly underneath the drain valve. The drain is located under the primary fuel filter/water separator.

  3. Open drain. Allow the fluid to drain into the container.

  4. After the separator is drained, close drain by hand pressure only. Dispose of the drained fluid in a safe place.

  5. Close the left engine access door.

Caterpillar Information System:

924K, 930K and 938K Wheel Loaders Operator Controls
D6N Track-Type Tractor Fuel System Primary Filter (Water Separator) - Replace
924K, 930K and 938K Wheel Loaders Steering Frame Lock
924K, 930K and 938K Wheel Loaders Declaration of Conformity
924K, 930K and 938K Wheel Loaders Plate Locations and Film Locations
966K XE Wheel Loader C9.3 Engine Supplement Fuel Manifold - Remove and Install - Clean Emissions Module
924K, 930K and 938K Wheel Loaders Specifications
D6N Track-Type Tractor Fuel System - Prime
621H, 623H and 627H Wheel Tractor-Scrapers Braking and Hydraulic Fan System Oil Filter (Brake, Differential Lock, Hydraulic Fan)
Possible Noise from Power Train when Changing Direction on Certain Medium Wheel Loader Machines{3030, 3101, 3251, 3253} Possible Noise from Power Train when Changing Direction on Certain Medium Wheel Loader Machines{3030, 3101, 3251, 3253}
D11T Track-Type Tractor Engine Supplement Engine Enclosure - Remove and Install
924K, 930K and 938K Wheel Loaders Rated Load
D6N Track-Type Tractor Engine Crankcase Breather Filter - Replace
924K, 930K and 938K Wheel Loaders Alert Indicators
924K, 930K and 938K Wheel Loaders Camera - Rear View Camera
980K Wheel Loader Electrohydraulic System MID 082 - CID 0364 - FMI 03
924K, 930K and 938K Wheel Loaders Stopping the Engine if an Electrical Malfunction Occurs
2011/03/03 A New Coolant Tube Is Now Used for the Coolant Tank on D10T Track-Type Tractors {1377}
D7E Track-Type Tractor Hydraulic, HVAC and Electrical Systems Calibration
924K, 930K and 938K Wheel Loaders Tire Inflation Pressure
924K, 930K and 938K Wheel Loaders Capacities (Refill)
966K Wheel Loader and 972K Wheel Loader Electrohydraulic System Main Control Valve
924K, 930K and 938K Wheel Loaders Articulation Bearings - Lubricate
992K Wheel Loader Machine Systems Rollover Protective Structure (ROPS) - Remove and Install
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.