966K XE Wheel Loader Machine Systems Caterpillar


Piston Pump (Brake, Pilot, Fan) - Disassemble

Usage:

966K XE NGX

拆解步骤

表 1
所需工具    
工具     零件号     零件描述     数量    
A     1P-0510     冲头总成     1    
B     1P-1854     挡圈钳     1    
C     1P-1853     挡圈钳     1    

开始:

  1. 将机具和转向泵从机器上拆下。



    图 1g00923925

  1. 拆下四个内六角螺钉 (2) 。 将补偿阀 (1) 从壳体 (3) 上拆下。

    ------ WARNING! ------

    被弹簧力爆出的零件击中,会招致人员伤害。

    确保穿上所有必要的保护装备。

    遵照建议的程序,并使用所有建议的工具以释放弹簧力。





    图 2g00923928

  1. 将螺塞 (4) 和 (5) 从补偿器阀 (1) 上拆下。 将接头 (6) 从补偿器阀 (1) 上拆下。



    图 3g00923930



    图 4g00923931

  1. 从螺塞 (4) 拆下 O 形密封圈 (7) 。 将阀座 (8) 从螺塞 (4) 上拆下。 拆下弹簧 (9) 和 (10) 。 拆下弹簧挡圈 (11) 。 将滑阀 (12) 从阀体 (19) 上拆下。

  1. 从螺塞 (5) 拆下 O 形密封圈 (13) 。 将阀座 (14) 从螺塞 (5) 上拆下。 拆下弹簧 (15) 和 (16) 。 拆下弹簧挡圈 (17) 。 将滑阀 (18) 从阀体 (19) 上拆下。



    图 5g00923932

  1. 将六角头螺钉 (20) 和端口座 (21) 从壳体 (3) 上拆下。



    图 6g00923933

  1. 拆下 O 型密封圈 (22) 。 将板 (23) 从端口座 (21) 上拆下。



    图 7g00923935

  1. 将轴承 (26) 从轴 (24) 上拆下。 拆下 O 形密封圈 (25) 。



    图 8g00923936

  1. 从轴 (24) 上拆下轴承预载垫片 (27) 。



    图 9g00923937

  1. 将旋转总成 (28) 从壳体 (3) 上拆下。 将旋转组件 (28) 小心地固定在壳体 (3) 中。 将旋转组件倒置。 将壳体 (3) 缓慢抬起离开旋转总成 (28) 。



    图 10g00923939



    图 11g00923940

    注: 标记活塞的位置以便于组装。

  1. 将板 (29) 和活塞 (30) 从活塞筒 (31) 上拆下。 拆下固定球 (32) 。

    ------ WARNING! ------

    被弹簧力爆出的零件击中,会招致人员伤害。

    确保穿上所有必要的保护装备。

    遵照建议的程序,并使用所有建议的工具以释放弹簧力。





    图 12g00923941



    图 13g00923943

  1. 利用工具 (A) 和适当的压具压缩弹簧 (34) ,直到可以利用工具 (B) 将卡环 (33) 从缸筒 (31) 上拆下。 由于弹簧压力的缘故,缓慢释放压具上的压力。 从压具上拆下活塞筒 (31) 。 拆下弹簧 (34) 、固定盘 (35) 和压力销 (36) 。



    图 14g00923944

  1. 拆下螺塞 (37) 和 O 形密封圈。



    图 15g00923990

  1. 将活塞 (38) 从壳体 (3) 上拆下。



    图 16g00923991

    注: 套筒的边缘使杆接合在槽中。 将杆从套筒中分离时必须格外小心。 将致动杆从形状光滑的套筒中拆出。

  1. 定位旋转斜盘 (39) 的角度,使杆 (40) 伸出孔外。 将杆 (40) 从旋转斜盘 (39) 的套筒上拆下。



    图 17g00923992

  1. 将旋转斜盘 (39) 从壳体 (3) 上拆下。 检查套筒 ( 41) 的状态。



    图 18g00923994

  1. 拆下两个轴承 (42) 。

  1. 拆下弹簧 (43) 。



    图 19g00923995

  1. 将轴 (24) 抬起离开壳体 (3) 。 如有必要,按压轴承 (44) 使其脱离轴 (24) 。



    图 20g00923996

  1. 使用工具 (C) 从壳体 (3) 上卸下卡环 (45) 。



    图 21g00923998

  1. 将密封 (46) 从壳体 (3) 上拆下。

Caterpillar Information System:

D6N Track-Type Tractor Monitoring System
966K XE Wheel Loader Machine Systems Piston Pump (Brake, Pilot, Fan) - Assemble
C27 and C32 Engines for Caterpillar Built Machines Cylinder Head - Remove and Install
D11T Track-Type Tractor Power Train Electrical Output Components
D11T Track-Type Tractor Power Train Electronic Control Module
D6N Track-Type Tractor Declaration of Conformity
D6N Track-Type Tractor Plate Locations and Film Locations
D6N Track-Type Tractor Specifications
C27 and C32 Engines for Caterpillar Built Machines Pressure Sensor (Cooled Exhaust Gas) - Remove and Install - NRS Differential Pressure
C27 and C32 Engines for Caterpillar Built Machines Pressure Sensor (Cooled Exhaust Gas) - Remove and Install - NRS Intake
D11T Track-Type Tractor Power Train Electrical Input Components
C7.1 Industrial Engine Relief Valve (Fuel) - Remove and Install
320E and 323E Excavators Machine System Specifications Refrigerant Compressor
D11T Track-Type Tractor Power Train Data Link
Procedure For Blade Solenoid Calibrations on Certain Track-Type Tractors{0785, 5479, 7610} Procedure For Blade Solenoid Calibrations on Certain Track-Type Tractors{0785, 5479, 7610}
D6N Track-Type Tractor Operation Information
D8T Track-Type Tractor Machine Systems Implement Control Valve - Assemble
(Custom) Pipe and Pole Forks Daily Inspection
C27 and C32 Engines for Caterpillar Built Machines Configuration Parameters
2010/12/06 A New Throttle Actuator Is Used for Some G3500 and G3500B Engines {1265, 1716}
C27 and C32 Engines for Caterpillar Built Machines Component Location
C6.6 Industrial Engine Exhaust Back Pressure Valve - Remove and Install
2010/12/24 New Relief Valve Groups Are Now Used for the Bucket Tilt on Certain Wheel Loaders {5051}
966K XE Wheel Loader Steering System Secondary Steering Pump and Electric Motor
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.