Fuel Transfer Pump - Remove and Install
Removal Procedure
Show/hide table
Personal injury or death may result from failure to adhere to the following procedures. Fuel leaked or spilled onto hot surfaces or electrical components can cause a fire. Clean up all leaked or spilled fuel. Do not smoke while working on the fuel system. Turn the disconnect switch OFF or disconnect the battery when changing fuel filters. |
- Open the left side engine door.
- Turn the fuel shutoff valve to the OFF position.
- Disconnect harness assemblies (1) and remove hose assemblies (3) .
Show/hide table
Illustration 1 | g02209373 |
- Remove the secondary fuel filter assembly.
- Disconnect hose assembly (5). Disconnect tube assemblies (4) .
Show/hide table
Illustration 2 | g02208995 |
- Remove bolts (3) .
- Loosen tube assembly (9). Loosen locknut (8). Remove nut (12) and reposition plate (7) .
Show/hide table
Illustration 3 | g02208996 |
- Remove nut (14) and bracket assembly (6) .
- Remove bolts (10), stud (11), stud (15), fuel transfer pump (13), and the O-ring seals.
Installation Procedure
- Install fuel transfer pump (13) in the reverse order of removal.
- Tighten bolts (10), stud (11), and stud (15) to a torque of 30 ± 4 N·m (22 ± 3 lb ft).
Caterpillar Information System:
Installation of 361-6832 High Intensity Discharge (HID) Lighting Kit {1429, 1434, 1434} Installation of 361-6832 High Intensity Discharge (HID) Lighting Kit {1429, 1434, 1434}
C6.6 Engines For Caterpillar Built Machines CID 0168 FMI 04
C6.6 Engines For Caterpillar Built Machines CID 0168 FMI 03
C7.1 Industrial Engine Fuel Temperature Sensor - Remove and Install
C7.1 Industrial Engine Flow Control Valve - Remove and Install
2010/08/19 Correction to Disassembly and Assembly , "Engine and Torque Converter Updrive Gears - Install" {1000, 3101, 3105, 3159}
2010/08/19 Correction to Disassembly and Assembly , "Engine and Torque Converter Updrive Gears - Install" {1000, 3101, 3105, 3159}
2010/08/19 Correction to Disassembly and Assembly , "Engine and Torque Converter Updrive Gears - Remove" {1000, 3101, 3105, 3159}
584 and 584HD Forwarders Fire Safety
966K and 972K Wheel Loaders Power Train Torque Converter, Transmission and Output Transfer Gears - Remove and Install
966K Wheel Loader and 972K Wheel Loader Power Train Transmission Hydraulic Control
Repair Procedure for Cracks on the Paddle Plate of the Rock Bucket on 988G and 988H Wheel Loaders{6102} Repair Procedure for Cracks on the Paddle Plate of the Rock Bucket on 988G and 988H Wheel Loaders{6102}
D8T Track-Type Tractor Engine Supplement Power Train Oil Cooler - Remove and Install
D11T Track-Type Tractor MID 113 - CID 0041 - FMI 03
D8R and D8T Track-Type Tractors Engine Supplement Hydraulic Oil Cooler - Remove and Install
D11T Track-Type Tractor MID 113 - CID 0041 - FMI 04
D11T Track-Type Tractor MID 113 - CID 0070 - FMI 03
NEHS1032: 538-5051 Communications Adapter 3 {0599, 0709, 1900, 4800, 7490, 7600} NEHS1032: 538-5051 Communications Adapter 3 {0599, 0709, 1900, 4800, 7490, 7600}
D11T Track-Type Tractor MID 113 - CID 0070 - FMI 04
D11T Track-Type Tractor MID 113 - CID 0168 - FMI 03
Caterpillar Monitoring System Service Tools
C4.2 and C6.4 Engines for Caterpillar Built Machines Air in Fuel - Test
D11T Track-Type Tractor MID 113 - CID 0168 - FMI 04
D11T, D8T and D9T Track-Type Tractors VIMSTM 3G / Product Link System Schematic