Crankshaft Rear Seal - Remove
拆卸步骤
Show/hide table
| 所需工具 | |||
|---|---|---|---|
| 工具 | 零件号 | 零件说明 | 数量 |
| A | 1U-7600 | 滑锤拉拔器 | 1 |
开始:
- 拆下飞轮。 请参阅拆解和组装, "飞轮 - 拆卸"。
Show/hide table
| 注意 |
|---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
- 利用工具 (A) 或冲头以及手锤在曲轴后密封组件 (1) 内冲出三个或更多小孔。
注: 必须同时更换后密封和耐磨衬套。 一旦曲轴后密封与耐磨衬套分开，不得再次使用这些部件。
Show/hide table
 | |
| 图 1 | g01260922 |
- 利用工具 (A) 拆下曲轴后密封组件 (1) 。
Caterpillar Information System:
C7 and C9 On-Highway Engines Vehicle Speed Parameters
C15 On-Highway Engine Gear Group (Front) - Install
C15 On-Highway Engine Gear Group (Front) - Remove
C15 On-Highway Engine Housing (Front) - Install
C15 On-Highway Engine Housing (Front) - Remove
C7 PETROLEUM Petroleum Engine Fan Drive - Assemble
C4.4 Industrial Engine Fuel Priming Pump
3456 Generator Sets Reference Material
C4.4 Industrial Engine Fuel Injection Pump
C4.4 Industrial Engine Fuel Filter Base
C4.4 Industrial Engine Fuel Transfer Pump
C4.4 Industrial Engine Fuel Injection Lines
C15 On-Highway Engine Crankshaft Rear Seal - Install
C7 and C9 On-Highway Engines Cruise Control Parameters
C7 PETROLEUM Petroleum Engine Fan Drive - Install
C9 Marine Engines and C9 Marine Generator Sets Water Temperature Regulator
C9 On-highway Engine Turbocharger
C7 PETROLEUM Petroleum Engine Electronic Control Module - Remove and Install
C-10 Petroleum Engine Maintenance Interval Schedule
C-15 Petroleum Engine Maintenance Interval Schedule
3412E Petroleum Engine Maintenance Interval Schedule
3126B Petroleum Engine Maintenance Interval Schedule
C7 and C9 On-Highway Engines Idle Parameters
3500B and 3500C Locomotive Engines Customer Parameters Worksheet