3408E and 3412E Engines for Caterpillar Built Machines Caterpillar


Flywheel

Usage:

769C 01X



图 1g01637225

典型实例

注: 组装前,用清洁的发动机机油、二硫化钼或石墨基润滑剂润滑螺栓的螺纹。

按照以下步骤拧紧螺栓 (1) :

  1. 按交叉顺序将螺母拧紧至 100 ± 5 N·m (75 ± 4 lb ft)。

  1. 再次多转 180 ± 5 度拧紧螺栓。

注: 维修时更换所有 12 个螺栓。

Caterpillar Information System:

Leaks In The Filter Housing{3004, 3067} Leaks In The Filter Housing{3004, 3067}
904H Compact Wheel Loader Hydraulic and Steering System Main Hydraulic System
2008/09/08 An Improved Seal For The Exhaust Tube Is Now Used {1062}
2008/09/29 New Belts and Belt Tensioners are Used {1207, 1359}
953D Track-Type Loader Power Train Brake and Final Drive Group
613G Wheel Tractor-Scraper Machine Monitor System Data Link
C9.3 Engine for Caterpillar Built Machines Exhaust Manifold
613G Wheel Tractor-Scraper Sound Information and Vibration Information
2008/09/01 Improved Orientation of the Hose on the Hydraulic Oil Lines Group {5057}
613G Wheel Tractor-Scraper Fuel Tank Cap and Strainer - Clean
D6R Track-Type Tractor Pivot Shaft Oil Level - Check
Custom Product Support Literature for the 980H Wheel Loaders that have a 331-9943 Steel Mill Arrangement {7000} Custom Product Support Literature for the 980H Wheel Loaders that have a 331-9943 Steel Mill Arrangement {7000}
G3500B Engines Electrical Power Supply - Test
D6R Track-Type Tractor Winch Oil Level - Check
2008/10/13 The New Wheel Will Increase Face Load of Duo-cone Seal Gp {4051}
D6R Track-Type Tractor Winch Oil and Breather - Change/Clean
973D Track-Type Loader Power Train Pressure Taps
993K Wheel Loader Machine Systems Selector and Pressure Control Valve (Secondary Steering) - Remove
993K Wheel Loader Machine Systems Selector and Pressure Control Valve (Secondary Steering) - Install
C9.3 Engine for Caterpillar Built Machines Inlet Manifold Air Pressure Sensor
3508B, 3512B, 3516B, 3512C and and 3516C Auxiliary Engines, Generator Set Engines, and Generator Sets Voltage Regulator Options
Reuse and Salvage for 3044, 3046, 3064, 3066, 3400, 3500, and C175 Engine Oil Pumps {1304, 1315} Reuse and Salvage for 3044, 3046, 3064, 3066, 3400, 3500, and C175 Engine Oil Pumps {1304, 1315}
3500 Generator Sets Generator Start-up Checklist
3408E and 3412E Engines for Caterpillar Built Machines Flywheel
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.