Capacities (Refill)
Show/hide table
| PERKIRAAN KAPASITAS PENGISIAN ULANG | |||
|---|---|---|---|
| Kompartemen atau sistem | Liter | US gal | Imperial gallon |
| Sistem Pendinginan | 77 | (20,3) | (16,9) |
| Tangki Bahan Bakar | (425) | (112,3) | (93,5) |
| Karter Engine dan Filter | (28,0) | (7,4) | (6,2) |
| Sistem Oli Power Train | 146 | (38,5) | (32,1) |
| Tangki Hidrolik dan Filter | 51,5 | (13,6) | (11,3) |
| Setiap Final Drive | (13,5) | (3,6) | (3) |
| Setiap Kompartemen Pegas Recoil | (25) | (6,5) | (5,5) |
| Setiap Poros Pivot | 1,9 | (0,5) | (0,4) |
| Winch | (67,2) | (17,8) | (14,8) |
Catatan: Bila melakukan pengoperasian di jalan yang sangat miring, jumlah oli dalam power train dapat ditingkatkan hingga 10 persen. Bila bekerja dengan jumlah oli yang ditambah, pengoperasian dalam waktu lama pada sebagian alat berat dapat menyebabkan temperatur oli power train yang tinggi. Setelah menyelesaikan pekerjaan di jalan yang curam, buang kelebihan jumlah oli dari kotak roda-gigi bevel.
Saluran Pembuangan Ekologi
Show/hide table
| Komponen Pembuangan Ekologi | |
| Lokasi Pembuangan | Komponen yang Dibutuhkan |
| Transmisi | 12,7 mm (0,5 inci) pipa dengan ulir 1/2-14 NPTH |
| Torque Converter | 12,7 mm (0,5 inci) pipa dengan ulir 1/2-14 NPTH |
| Oli Engine | Pipa 19 mm (0,75 inch) dengan ulir 3/4-14 NPTH |
| Tangki Hidrolik | Kopling Pembuangan Oli 126-7914 atau Pipa 25,4 mm (1 inci) dengan ulir 1-11 1/2 NPTH |
| Kotak Rodagigi Bevel | Pipa berukuran 33 mm (1,31 inci) dengan ulir 1-5 16/12 NPTH |
Caterpillar Information System:
Corrosion Protection Package for Certain Wheel Loader Machines{0645, 1000, 7000, 7559} Corrosion Protection Package for Certain Wheel Loader Machines{0645, 1000, 7000, 7559}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562} Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
C9 Engine and D7E Track-Type Tractors Engine Does Not Crank
D6N Track-Type Tractor Reference Material
657G Wheel Tractor-Scraper Maintenance Interval Schedule
2008/09/08 Improved Metering Pump For Compact Wheel Loaders {4312}
3500 Generator Sets Generator Operation
D7R Track-Type Bulldozer Stopping the Engine
D7R Track-Type Bulldozer Stopping the Machine
994F and 994H Wheel Loaders Automatic Lubrication System Automatic Lubrication System - Maintenance
993K Wheel Loader Machine Systems Piston Pump (Implement Pilot) (Axle Oil Cooler) - Disassemble
613G Wheel Tractor-Scraper Machine Monitor System Component Description
988F and 988F Series II Wheel Loaders Power Train STIC Control - Install
988F and 988F Series II Wheel Loaders Power Train Fixed Axle (Front) - Install
988F and 988F Series II Wheel Loaders Power Train Oscillating Axle (Rear) - Install
D6R Track-Type Tractor Braking System - Test
988F and 988F Series II Wheel Loaders Power Train Oscillating Axle (Rear) - Install
Medium Wheel Loader Series H Definitions of Configuration Parameters for Transmission, Engine and Implement Electronic Control Modules{1901, 1920, 4800, 7610, 7620} Medium Wheel Loader Series H Definitions of Configuration Parameters for Transmission, Engine and Implement Electronic Control Modules{1901, 1920, 4800, 7610, 7620}
993K Wheel Loader Machine Systems Selector and Pressure Control Valve (Secondary Steering) - Disassemble
D6R Track-Type Tractor Fuel Tank Cap Filter and Strainer - Replace/Clean
Custom Product Support Literature for the 980H Wheel Loaders that have a 331-9944 Steel Mill Arrangement {0374, 7000} Custom Product Support Literature for the 980H Wheel Loaders that have a 331-9944 Steel Mill Arrangement {0374, 7000}
C9.3 Engine for Caterpillar Built Machines Fuel Injector
613G Wheel Tractor-Scraper Power Train Axle Mounting
613G Wheel Tractor-Scraper Power Train Drive Shaft