814F Series 2 Wheel Dozer, 815F Series 2 Soil Compactor and 816F Series 2 Landfill Compactor Caterpillar


Display and Camera - Clean - If Equipped

Usage:

814F II BXG
工作区域视像系统

为了保持足够的视线,应保持工作区域视像系统 (WAVS) 的照相机镜头和显示器清洁。

显示器




图 1g01223034

WAVS 显示器

用一块软的潮湿的布清洁显示器。 显示器的表面是软的塑料,很容易被摩擦性物料损坏。 该显示器不是密封的。 不可将显示器浸入液体中。

照相机




图 2g01223051

WAVS 照相机位于机器后部,在散热器护罩顶部上。

用湿布或用水喷来清洁照相机镜头。照相机是一个密封件。 高压喷水不会影响照相机

照相机配备有内部加热器以协助抵消湿气、雪或冰的影响。

注: 有关 WAVS 的更详细的资料,请参阅操作和保养手册, SEBU8157, "工作区域视像系统"。

Caterpillar Information System:

993K Wheel Loader Electrohydraulic System Relief Valve Pressure (Line, Tilt Cylinder Head End Port) - Test and Adjust
854K Wheel Dozer and 992K Wheel Loader Power Train MID 081 - CID 0623 - FMI 03
854K Wheel Dozer Machine Systems Piston Pump (Brake) - Install
854K Wheel Dozer Machine Systems Piston Pump (Brake) - Remove
C4.4 and C6.6 Engines for Caterpillar Built Machines CID 0005 FMI 07
C4.4 and C6.6 Engines for Caterpillar Built Machines CID 0005 FMI 06
C4.4 and C6.6 Engines for Caterpillar Built Machines CID 0005 FMI 05
C4.4 and C6.6 Engines for Caterpillar Built Machines CID 0005 FMI 02
992K Wheel Loader and 854K Wheel Dozer Power Train Final Drive and Wheel - Assemble
993K Wheel Loader Electrohydraulic System Relief Valve Pressure (Line, Lift Cylinder Rod End Port) - Test and Adjust
993K Wheel Loader Electrohydraulic System Relief Valve Pressure (Line, Lift Cylinder Head End Port) - Test and Adjust
2008/02/04 A Secondary Pin Retention System Is Now Used on Wheel Loaders {6107, 6501}
IT38H Integrated Toolcarrier and 938H Wheel Loader Transmission Electronic Control System MID 081 - CID 0041 - FMI 03
993K Wheel Loader Electrohydraulic System Relief Valve Pressure (Line, Tilt Cylinder Rod End Port) - Test and Adjust
854K Wheel Dozer and 992K Wheel Loader Power Train MID 081 - CID 0626 - FMI 03
IT38H Integrated Toolcarrier and 938H Wheel Loader Transmission Electronic Control System MID 081 - CID 0041 - FMI 04
844K and 854K Wheel Dozers and 990K, 992K, 993K, 994F and 994H Wheel Loaders Powered Access Stairway General Information
IT38H Integrated Toolcarrier and 938H Wheel Loader Transmission Electronic Control System MID 081 - CID 0070 - FMI 03
854K Wheel Dozer and 992K Wheel Loader Power Train MID 081 - CID 0626 - FMI 04
854K Wheel Dozer and 992K Wheel Loader Power Train MID 081 - CID 0627 - FMI 03
IT38H Integrated Toolcarrier and 938H Wheel Loader Transmission Electronic Control System MID 081 - CID 0070 - FMI 04
IT38H Integrated Toolcarrier and 938H Wheel Loader Transmission Electronic Control System MID 081 - CID 0177 - FMI 03
854K Wheel Dozer and 992K Wheel Loader Power Train MID 081 - CID 0627 - FMI 04
844K and 854K Wheel Dozers and 990K, 992K, 993K, 994F and 994H Wheel Loaders Powered Access Stairway Diagnostic Code List
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.