A Secondary Pin Retention System Is Now Used on Wheel Loaders {6107, 6501}
- Wheel Loader:
- 992G (S/N: 7HR1-UP; AZX1-792; ADZ1-UP)
ReferenceRefer to Special Instruction, REHS4134, "Installation Procedure for Secondary Pin Retention System on Wheel Loaders".
Description of Change: An axial retention pin is now used on the boom of the 992G Wheel Loaders. The retention pin is installed at the A-pin joint and at the B-pin joint in order to prohibit lateral movement of the pin cartridge.
The special instruction that is referenced above contains the installation procedure of the axial retention pin to the boom.
Adaptable To: The new axial retention pin is adaptable to the machines that are listed above.
The new axial retention pin is effective with the following machines:
- 992G AZX793-UP
Caterpillar Information System:
992K Wheel Loader and 854K Wheel Dozer Power Train Final Drive and Wheel - Disassemble
2008/02/04 The New Welding Procedure for The Rear Trunnion Support Area of The Rear Frame {7051}
2008/04/21 A Procedure is Available to Repair the Upper Hitch Assembly {7054, 7057, 7100}
992K Wheel Loader and 854K Wheel Dozer Power Train Service Brake - Assemble
The Boom and Bearing Group May Crack on the 988H Wheel Loaders{6501} The Boom and Bearing Group May Crack on the 988H Wheel Loaders{6501}
854K Wheel Dozer and 992K Wheel Loader Power Train MID 081 - CID 0622 - FMI 04
992K Wheel Loader and 854K Wheel Dozer Power Train Service Brake - Disassemble
854K Wheel Dozer and 992K Wheel Loader Power Train MID 081 - CID 0622 - FMI 03
992K Wheel Loader and 854K Wheel Dozer Power Train Final Drive and Wheel to Service Brake - Connect
992K Wheel Loader and 854K Wheel Dozer Power Train Final Drive and Wheel from Service Brake - Separate
854K Wheel Dozer and 992K Wheel Loader Power Train MID 081 - CID 0621 - FMI 04
992K Wheel Loader Electrohydraulic System Pressure Tap Locations
993K Wheel Loader Electrohydraulic System Relief Valve Pressure (Line, Lift Cylinder Head End Port) - Test and Adjust
993K Wheel Loader Electrohydraulic System Relief Valve Pressure (Line, Lift Cylinder Rod End Port) - Test and Adjust
992K Wheel Loader and 854K Wheel Dozer Power Train Final Drive and Wheel - Assemble
C4.4 and C6.6 Engines for Caterpillar Built Machines CID 0005 FMI 02
C4.4 and C6.6 Engines for Caterpillar Built Machines CID 0005 FMI 05
C4.4 and C6.6 Engines for Caterpillar Built Machines CID 0005 FMI 06
C4.4 and C6.6 Engines for Caterpillar Built Machines CID 0005 FMI 07
854K Wheel Dozer Machine Systems Piston Pump (Brake) - Remove
854K Wheel Dozer Machine Systems Piston Pump (Brake) - Install
854K Wheel Dozer and 992K Wheel Loader Power Train MID 081 - CID 0623 - FMI 03
993K Wheel Loader Electrohydraulic System Relief Valve Pressure (Line, Tilt Cylinder Head End Port) - Test and Adjust
814F Series 2 Wheel Dozer, 815F Series 2 Soil Compactor and 816F Series 2 Landfill Compactor Display and Camera - Clean - If Equipped