C4.4 and C6.6 Engines for Caterpillar Built Machines Caterpillar


CID 0005 FMI 07

Usage:

559 559
产生此代码的情况:

该诊断代码仅适用于 C6.6发动机。

电子单体喷油器不再能输送正确数量的燃油。

系统响应:

控制面板显示屏会出现一条警告。 电子控制模块(ECM)将会记录该诊断代码。

注: 该诊断代码可在通过电子维修工具查看。

发动机将减额。

使用电子维修工具执行燃油系统验证测试。 如果诊断代码依然激活,请执行下面的步骤。

更换可能有故障的电子单体喷射器。 请参阅拆解和组装, "电子单体喷射器 - 拆解"和 拆解和组装, "电子单体喷射器 - 组装"。

使用电子维修工具执行燃油系统验证测试。

测试步骤 1. 进行以下的诊断步骤:

结果:

  • 正常 - 停止

Caterpillar Information System:

C4.4 and C6.6 Engines for Caterpillar Built Machines CID 0005 FMI 06
C4.4 and C6.6 Engines for Caterpillar Built Machines CID 0005 FMI 05
C4.4 and C6.6 Engines for Caterpillar Built Machines CID 0005 FMI 02
992K Wheel Loader and 854K Wheel Dozer Power Train Final Drive and Wheel - Assemble
993K Wheel Loader Electrohydraulic System Relief Valve Pressure (Line, Lift Cylinder Rod End Port) - Test and Adjust
993K Wheel Loader Electrohydraulic System Relief Valve Pressure (Line, Lift Cylinder Head End Port) - Test and Adjust
2008/02/04 A Secondary Pin Retention System Is Now Used on Wheel Loaders {6107, 6501}
992K Wheel Loader and 854K Wheel Dozer Power Train Final Drive and Wheel - Disassemble
2008/02/04 The New Welding Procedure for The Rear Trunnion Support Area of The Rear Frame {7051}
2008/04/21 A Procedure is Available to Repair the Upper Hitch Assembly {7054, 7057, 7100}
992K Wheel Loader and 854K Wheel Dozer Power Train Service Brake - Assemble
The Boom and Bearing Group May Crack on the 988H Wheel Loaders{6501} The Boom and Bearing Group May Crack on the 988H Wheel Loaders{6501}
854K Wheel Dozer Machine Systems Piston Pump (Brake) - Remove
854K Wheel Dozer Machine Systems Piston Pump (Brake) - Install
854K Wheel Dozer and 992K Wheel Loader Power Train MID 081 - CID 0623 - FMI 03
993K Wheel Loader Electrohydraulic System Relief Valve Pressure (Line, Tilt Cylinder Head End Port) - Test and Adjust
814F Series 2 Wheel Dozer, 815F Series 2 Soil Compactor and 816F Series 2 Landfill Compactor Display and Camera - Clean - If Equipped
IT38H Integrated Toolcarrier and 938H Wheel Loader Transmission Electronic Control System MID 081 - CID 0041 - FMI 03
993K Wheel Loader Electrohydraulic System Relief Valve Pressure (Line, Tilt Cylinder Rod End Port) - Test and Adjust
854K Wheel Dozer and 992K Wheel Loader Power Train MID 081 - CID 0626 - FMI 03
IT38H Integrated Toolcarrier and 938H Wheel Loader Transmission Electronic Control System MID 081 - CID 0041 - FMI 04
844K and 854K Wheel Dozers and 990K, 992K, 993K, 994F and 994H Wheel Loaders Powered Access Stairway General Information
IT38H Integrated Toolcarrier and 938H Wheel Loader Transmission Electronic Control System MID 081 - CID 0070 - FMI 03
854K Wheel Dozer and 992K Wheel Loader Power Train MID 081 - CID 0626 - FMI 04
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.