992K Wheel Loader and 854K Wheel Dozer Steering System Caterpillar

Articulated Hitch

Usage:

854K 221

Show/hide table




Illustration 1	g06126666
Upper Hitch Assembly

Show/hide table

Table 1
Item	Qty	Part	Specification Description
1	6	106-4175 Bolt	Torque to 520 ± 70 N·m (384 ± 52 lb ft).
2	1	4E-8157 Shim Pack	Use the following shim packs to achieve the upper pin clearance: Total thickness of ten shims is 0.16 mm (0.006 inch). Total thickness of two shims is 0.8 mm (0.03 inch). Total thickness of 14 shims is 0.05 mm (0.002 inch).
3	12	6C-5303 Bolt	Torque to 150 ± 20 N·m (110 ± 15 lb ft). Turn the bolts for an additional 120 ± 10 degrees.
4	1	4E-8156 Shim Pack	Use the following shim packs to achieve the upper pin clearance: Total thickness of ten shims is 0.16 mm (0.006 inch). Total thickness of two shims is 0.8 mm (0.03 inch). Total thickness of 14 shims is 0.05 mm (0.002 inch).
5	2	5P-9609 Lip Type Seal	Lubricate the sealing lip lightly with the lubricant that is being sealed.
6	1	117-0292 Shim Pack	Use the following shim packs to achieve the upper pin clearance: Total thickness of ten shims is 0.16 mm (0.006 inch). Total thickness of two shims is 0.8 mm (0.03 inch). Total thickness of 14 shims is 0.05 mm (0.002 inch).

Show/hide table




Illustration 2	g06126672
Lower Hitch Assembly

Show/hide table

Table 2
Item	Qty	Part	Specification Description
7	2	5P-2673 Lip Type Seal	Lubricate the sealing lip lightly with the lubricant that is being sealed.
8	1	4E-8162 Shim Pack	Use the following shim packs to achieve the upper pin clearance: Total thickness of ten shims is 0.16 mm (0.006 inch). Total thickness of two shims is 0.8 mm (0.03 inch). Total thickness of 14 shims is 0.05 mm (0.002 inch).
9	-	-	Rolling torque to 2.26 ± 7.91 N·m (20.00 ± 70.01 lb in).

Caterpillar Information System:

3508B Engine for Caterpillar Built Machines Crankcase Breather

992K Wheel Loader and 854K Wheel Dozer Power Train Rim Mounting

992K Wheel Loader Electrohydraulic System Control Valve (Tilt Regeneration)

3500B Engines and 776D, 777D, 784C, 785C, 789C, 793C and 793D Off-Highway Truck/Tractors Engine Speed/Timing Sensor

AD55B Underground Articulated Truck C27 Engine Supplement Oil Cooler (Power Train) - Install

Intermittent Secondary Steering Alarm{1408, 4323, 7451} Intermittent Secondary Steering Alarm{1408, 4323, 7451}

992K Wheel Loader Electrohydraulic System MID 082 - CID 0490 - FMI 03

AD55B Underground Articulated Truck C27 Engine Supplement Oil Cooler (Power Train) - Remove

993K Wheel Loader Power Train Electrical Input Components

854K Wheel Dozer Hydraulic System General Information

994F Wheel Loader Fuel Priming Pump and Primary Fuel Filter - Install

844K and 854K Wheel Dozers and 990K, 992K, 993K, 994F and 994H Wheel Loaders Powered Access Stairway MID 082 - CID 0365 - FMI 04

992G Wheel Loader Electrohydraulic System Relief Valve (Line) - Rod End

992K Wheel Loader Electrohydraulic System MID 082 - CID 0490 - FMI 04

844K and 854K Wheel Dozers and 990K, 992K, 993K, 994F and 994H Wheel Loaders Powered Access Stairway MID 082 - CID 0590 - FMI 09

854K Wheel Dozer Hydraulic System Pilot Hydraulic System

854K Wheel Dozer Hydraulic System Main Hydraulic System

854K Wheel Dozer Additional Messages

844K and 854K Wheel Dozers and 990K, 992K, 993K, 994F and 994H Wheel Loaders Powered Access Stairway MID 082 - CID 0590 - FMI 12

992K Wheel Loader Electrohydraulic System MID 082 - CID 0592 - FMI 03

854K Wheel Dozer Hydraulic System Main Control Valve

992K Wheel Loader Electrohydraulic System MID 082 - CID 0592 - FMI 05

992K Wheel Loader Electrohydraulic System MID 082 - CID 0592 - FMI 06

C4.4 and C6.6 Engines for Caterpillar Built Machines Sensors and Electrical Connectors