Failure to comply to the rated load can cause possible personal injury or property damage. Review the rated load of a particular work tool before performing any operation. Make adjustments to the rated load as necessary for non-standard configurations. |
Machine stability is affected by many factors, including the type of work tool and the position of a work tool. Machine stability and machine control can be significantly affected if a work tool is not installed. Operating a machine without a work tool can lead to loss of control or tipping of the machine which could result in serious injury or death. When you operate a machine without a work tool, avoid the following conditions:
|
Note: Rated loads should be used as a guide. Attachments, uneven ground conditions, soft ground conditions, or poor ground conditions have effects on rated loads. The operator is responsible for being aware of these effects.
Only use Caterpillar approved work tools on this machine.
Note: Do not use a Caterpillar work tool on a machine that is not approved by Caterpillar.
Many of the work tools in the table have an Operation and Maintenance Manual. Please refer to the Operation and Maintenance Manual that is provided with the work tool for the proper use of the work tool.
Contact your Caterpillar dealer concerning specific work tools that are approved by Caterpillar for this machine. This list was complete at the time of publication.
Bucket Family
Illustration 1 | g01177281 |
(A) Dump Clearance (B) Reach |
Rated loads will vary with different work tools. Contact your Caterpillar dealer regarding the rated load for your specific machine configuration.
Buckets     | Part number     | Volume     | Rated load     | Tipping load - straight     | Tipping load - full turn     | Bucket weight     | Dump clearance     | Reach     |
---|---|---|---|---|---|---|---|---|
General Purpose Bucket (SSL style)     | 260-6299     | 0.60 cubic meter (0.78 cubic yard)     |
1251.00 kg (2757.98 lb)     |
2973.00 kg (6554.34 lb)     |
2502.00 kg (5515.97 lb)     |
279.00 kg (615.09 lb)     |
2377.00 mm (93.58 inches)     |
658.00 mm (25.91 inches)     |
Multipurpose Bucket (SSL style)     | 259-6010     | 0.60 cubic meter (0.78 cubic yard)     |
1198.00 kg (2641.14 lb)     |
2867.00 kg (6320.65 lb)     |
2395.00 kg (5280.07 lb)     |
374.00 kg (824.53 lb)     |
2377.00 mm (93.58 inches)     |
658.00 mm (25.91 inches)     |
Light Material Bucket (SSL style)     | 261-1368     | 1.00 cubic meter (1.31 cubic yard)     |
1195.00 kg (2634.52 lb)     |
2861.00 kg (6307.42 lb)     |
2390.00 kg (5269.05 lb)     |
391.00 kg (862.01 lb)     |
2204.00 mm (86.77 inches)     |
816.00 mm (32.13 inches)     |
General Purpose Bucket (Hook on style)     | 261-1324     | 0.60 cubic meter (0.78 cubic yard)     |
1257.00 kg (2771.21 lb)     |
2984.00 kg (6578.59 lb)     |
2513.00 kg (5540.22 lb)     |
268.00 kg (590.84 lb)     |
2377.00 mm (93.58 inches)     |
658.00 mm (25.91 inches)     |
Multipurpose Bucket (Hook on style)     | 259-6060     | 0.60 cubic meter (0.78 cubic yard)     |
1192.00 kg (2627.91 lb)     |
2855.00 kg (6294.20 lb)     |
2383.00 kg (5253.62 lb)     |
376.00 kg (828.94 lb)     |
2377.00 mm (93.58 inches)     |
658.00 mm (25.91 inches)     |
Light Material Bucket (Hook on style)     | 261-1380     | 1.00 cubic meter (1.31 cubic yard)     |
1195.00 kg (2634.52 lb)     |
2860.00 kg (6305.22 lb)     |
2389.00 kg (5266.84 lb)     |
380.00 kg (837.76 lb)     |
2204.00 mm (86.77 inches)     |
816.00 mm (32.13 inches)     |
Industrial Grapple Bucket (60 inch SSL style)     | 157-7226     | NA     | 1186.00 kg (2614.68 lb)     |
2839.00 kg (6258.92 lb)     |
2371.00 kg (5227.16 lb)     |
408.00 kg (899.49 lb)     |
2334.00 mm (91.89 inches)     |
823.00 mm (32.40 inches)     |
Industrial Grapple Bucket (66 inch SSL style)     | 157-7227     | NA     | 1174.00 kg (2588.23 lb)     |
2815.00 kg (6206.01 lb)     |
2348.00 kg (5176.45 lb)     |
427.00 kg (941.37 lb)     |
2334.00 mm (91.89 inches)     |
823.00 mm (32.40 inches)     |
Industrial Grapple Bucket (72 inch SSL style)     | 158-6095     | NA     | 1164.00 kg (2566.18 lb)     |
2796.00 kg (6164.12 lb)     |
2328.00 kg (5132.36 lb)     |
443.00 kg (976.65 lb)     |
2334.00 mm (91.89 inches)     |
823.00 mm (32.40 inches)     |
Industrial Grapple Bucket (78 inch SSL style)     | 217-6230     | NA     | 1166.00 kg (2570.59 lb)     |
2799.00 kg (6170.74 lb)     |
2332.00 kg (5141.18 lb)     |
439.00 kg (967.83 lb)     |
2334.00 mm (91.89 inches)     |
823.00 mm (32.40 inches)     |
Fork Section
Illustration 2 | g01154368 |
Dimensions for the following tables |
Forks (SAE J1197)
Rated loads will vary with different work tools. Contact your Caterpillar dealer regarding the rated load for your specific machine configuration.
Forks (SAE J1197)     |     | Part number     | Fork tine length     | Load center - B     | Rated Operating load     | Placement height - A     | Reach - C     | Fork assembly weight     |
---|---|---|---|---|---|---|---|---|
SSL fork carriage     |     | 261-1315     |     |     |     |     |     |     |
    | 920 mm (36 inch) fork tine     | 151-5134     | 920.00 mm (36.22 inches)     |
460.00 mm (18.11 inches)     |
993.00 kg (2189.19 lb)     |
1447.00 mm (56.97 inches)     |
1372.00 mm (54.02 inches)     |
164.00 kg (361.56 lb)     |
    | 1070 mm (42 inch) fork tine     | 149-1412     | 1070.00 mm (42.13 inches)     |
535.00 mm (21.06 inches)     |
985.00 kg (2171.55 lb)     |
1447.00 mm (56.97 inches)     |
1372.00 mm (54.02 inches)     |
174.00 kg (383.60 lb)     |
    | 1120 mm (44 inch) fork tine     | 149-7665     | 1120.00 mm (44.09 inches)     |
560.00 mm (22.05 inches)     |
978.00 kg (2156.12 lb)     |
1452.00 mm (57.17 inches)     |
1377.00 mm (54.21 inches)     |
186.00 kg (410.06 lb)     |
    | 1220 mm (48 inch) fork tine     | 161-2437     | 1220.00 mm (48.03 inches)     |
610.00 mm (24.02 inches)     |
970.00 kg (2138.48 lb)     |
1452.00 mm (57.17 inches)     |
1377.00 mm (54.21 inches)     |
196.00 kg (432.11 lb)     |
Hook on fork carriage     |     | 261-1409     |     |     |     |     |     |     |
    | 920 mm (36 inch) fork tine     | 151-5134     | 920.00 mm (36.22 inches)     |
460.00 mm (18.11 inches)     |
988.00 kg (2178.17 lb)     |
1380.00 mm (54.33 inches)     |
1358.00 mm (53.46 inches)     |
181.00 kg (399.04 lb)     |
    | 1070 mm (42 inch) fork tine     | 149-1412     | 1070.00 mm (42.13 inches)     |
535.00 mm (21.06 inches)     |
979.00 kg (2158.33 lb)     |
1380.00 mm (54.33 inches)     |
1358.00 mm (53.46 inches)     |
191.00 kg (421.08 lb)     |
    | 1120 mm (44 inch) fork tine     | 149-7665     | 1120.00 mm (44.09 inches)     |
560.00 mm (22.05 inches)     |
972.00 kg (2142.89 lb)     |
1385.00 mm (54.53 inches)     |
1363.00 mm (53.66 inches)     |
203.00 kg (447.54 lb)     |
    | 1220 mm (48 inch) fork tine     | 161-2437     | 1220.00 mm (48.03 inches)     |
610.00 mm (24.02 inches)     |
964.00 kg (2125.26 lb)     |
1385.00 mm (54.53 inches)     |
1363.00 mm (53.66 inches)     |
213.00 kg (469.58 lb)     |
Forks on Rough Terrain
Rated loads will vary with different work tools. Contact your Caterpillar dealer regarding the rated load for your specific machine configuration.
Forks on rough terrain (EN 474-3)     |     | Part number     | Fork tine length     | Load center - B     | Rated Operating load     | Placement height - A     | Reach - C     | Fork assembly weight     |
---|---|---|---|---|---|---|---|---|
SSL fork carriage     |     | 261-1315     |     |     |     |     |     |     |
    | 920 mm (36 inch) fork tine     | 151-5134     | 920.00 mm (36.22 inches)     |
500.00 mm (19.69 inches)     |
1189.00 kg (2621.30 lb)     |
1447.00 mm (56.97 inches)     |
1372.00 mm (54.02 inches)     |
164.00 kg (361.56 lb)     |
    | 1070 mm (42 inch) fork tine     | 149-1412     | 1070.00 mm (42.13 inches)     |
500.00 mm (19.69 inches)     |
1184.00 kg (2610.27 lb)     |
1447.00 mm (56.97 inches)     |
1372.00 mm (54.02 inches)     |
174.00 kg (383.60 lb)     |
    | 1120 mm (44 inch) fork tine     | 149-7665     | 1120.00 mm (44.09 inches)     |
500.00 mm (19.69 inches)     |
1178.00 kg (2597.05 lb)     |
1452.00 mm (57.17 inches)     |
1377.00 mm (54.21 inches)     |
186.00 kg (410.06 lb)     |
    | 1220 mm (48 inch) fork tine     | 161-2437     | 1220.00 mm (48.03 inches)     |
500.00 mm (19.69 inches)     |
1173.00 kg (2586.02 lb)     |
1452.00 mm (57.17 inches)     |
1377.00 mm (54.21 inches)     |
196.00 kg (432.11 lb)     |
Hook on fork carriage     |     | 261-1409     |     |     |     |     |     |     |
    | 920 mm (36 inch) fork tine     | 151-5134     | 920.00 mm (36.22 inches)     |
500.00 mm (19.69 inches)     |
1182.00 kg (2605.86 lb)     |
1380.00 mm (54.33 inches)     |
1358.00 mm (53.46 inches)     |
181.00 kg (399.04 lb)     |
    | 1070 mm (42 inch) fork tine     | 149-1412     | 1070.00 mm (42.13 inches)     |
500.00 mm (19.69 inches)     |
1177.00 kg (2594.84 lb)     |
1380.00 mm (54.33 inches)     |
1358.00 mm (53.46 inches)     |
191.00 kg (421.08 lb)     |
    | 1120 mm (44 inch) fork tine     | 149-7665     | 1120.00 mm (44.09 inches)     |
500.00 mm (19.69 inches)     |
1171.00 kg (2581.61 lb)     |
1385.00 mm (54.53 inches)     |
1363.00 mm (53.66 inches)     |
203.00 kg (447.54 lb)     |
    | 1220 mm (48 inch) fork tine     | 161-2437     | 1220.00 mm (48.03 inches)     |
500.00 mm (19.69 inches)     |
1166.00 kg (2570.59 lb)     |
1385.00 mm (54.53 inches)     |
1363.00 mm (53.66 inches)     |
213.00 kg (469.58 lb)     |
Forks on Firm Level Surface
Rated loads will vary with different work tools. Contact your Caterpillar dealer regarding the rated load for your specific machine configuration.
Forks on firm and level surface (EN 474-3)     |     | Part number     | Fork tine length     | Load center - B     | Rated Operating load     | Placement height - A     | Reach - C     | Fork assembly weight     |
---|---|---|---|---|---|---|---|---|
SSL fork carriage     |     | 261-1315     |     |     |     |     |     |     |
    | 920 mm (36 inch) fork tine     | 151-5134     | 920.00 mm (36.22 inches)     |
500.00 mm (19.69 inches)     |
1585.00 kg (3494.33 lb)     |
1447.00 mm (56.97 inches)     |
1372.00 mm (54.02 inches)     |
164.00 kg (361.56 lb)     |
    | 1070 mm (42 inch) fork tine     | 149-1412     | 1070.00 mm (42.13 inches)     |
500.00 mm (19.69 inches)     |
1579.00 kg (3481.10 lb)     |
1447.00 mm (56.97 inches)     |
1372.00 mm (54.02 inches)     |
174.00 kg (383.60 lb)     |
    | 1120 mm (44 inch) fork tine     | 149-7665     | 1120.00 mm (44.09 inches)     |
500.00 mm (19.69 inches)     |
1571.00 kg (3463.46 lb)     |
1452.00 mm (57.17 inches)     |
1377.00 mm (54.21 inches)     |
186.00 kg (410.06 lb)     |
    | 1220 mm (48 inch) fork tine     | 161-2437     | 1220.00 mm (48.03 inches)     |
500.00 mm (19.69 inches)     |
1564.00 kg (3448.03 lb)     |
1452.00 mm (57.17 inches)     |
1377.00 mm (54.21 inches)     |
196.00 kg (432.11 lb)     |
Hook on fork carriage     |     | 261-1409     |     |     |     |     |     |     |
    | 920 mm (36 inch) fork tine     | 151-5134     | 920.00 mm (36.22 inches)     |
500.00 mm (19.69 inches)     |
1576.00 kg (3474.49 lb)     |
1380.00 mm (54.33 inches)     |
1358.00 mm (53.46 inches)     |
181.00 kg (399.04 lb)     |
    | 1070 mm (42 inch) fork tine     | 149-1412     | 1070.00 mm (42.13 inches)     |
500.00 mm (19.69 inches)     |
1570.00 kg (3461.26 lb)     |
1380.00 mm (54.33 inches)     |
1358.00 mm (53.46 inches)     |
191.00 kg (421.08 lb)     |
    | 1120 mm (44 inch) fork tine     | 149-7665     | 1120.00 mm (44.09 inches)     |
500.00 mm (19.69 inches)     |
1561.00 kg (3441.42 lb)     |
1385.00 mm (54.53 inches)     |
1363.00 mm (53.66 inches)     |
203.00 kg (447.54 lb)     |
    | 1220 mm (48 inch) fork tine     | 161-2437     | 1220.00 mm (48.03 inches)     |
500.00 mm (19.69 inches)     |
1555.00 kg (3428.19 lb)     |
1385.00 mm (54.53 inches)     |
1363.00 mm (53.66 inches)     |
213.00 kg (469.58 lb)     |
Grapple Fork
Rated loads will vary with different work tools. Contact your Caterpillar dealer regarding the rated load for your specific machine configuration.
Grapple fork     | Part number     | Load center - B     | Rated Operating load     | Fork assembly weight     |
---|---|---|---|---|
Industrial Grapple Fork (66 inch SSL style)     | 162-8139     | 279.50 mm (11.00 inches)     |
952.00 kg (2098.80 lb)     |
479.00 kg (1056.01 lb)     |
Industrial Grapple Fork (72 inch SSL style)     | 163-4812     | 279.50 mm (11.00 inches)     |
932.00 kg (2054.71 lb)     |
523.00 kg (1153.02 lb)     |
Material Handling Arm
Rated loads will vary with different work tools. Contact your Caterpillar dealer regarding the rated load for your specific machine configuration.
The maximum placement height (ground line to the chain hook) and maximum reach (front of machine to the chain hook) are given for the highest position of the material handling arm.
The Rated Operating Capacity (R.O.C.) is the least amount of weight of the following conditions:
- 50% of the full static tipping load on a hard, smooth, level surface
- The minimum lifting capacity
- The material handling arm has a structural capacity of 907 kg (2000 lb).
The following table provides the rated operating loads for the standard machine configuration that is equipped with the following items:
- 12X16.5 tires (350 kPa (51 psi))
- full fuel tank
- 75 kg (165 lb) operator
- Machine with Cab and Heater
- Caterpillar Material Handling Arm
Illustration 3 | g00668844 |
Illustration 4 | g01204796 |
Dimension (A) represents the clearance at the full down position from Lifting Point 2. Dimension (a) represents the clearance at the full down position from Lifting Point 1. Dimension (B) represents the clearance at maximum height from Lifting Point 2. Dimension (b) represents the clearance at maximum height from Lifting Point 1. Dimension (C) represents the minimum reach at the full down position from Lifting Point 2. Dimension (c) represents the minimum rack at the full down position from Lifting Point 1. Dimension (D) represents the maximum reach from Lifting Point 2. Dimension (d) represents the maximum reach from Lifting Point 1. |
Rated Operating Capacity (R.O.C.) Material Handling Arm 216-8756     | ||
---|---|---|
904H Machine     | ||
    | Lifting Point 1 (1)     | Lifting Point 2 (2)     |
R.O.C.     | 784 kg (1728 lb)     |
676 kg (1490 lb)     |
Clearance at Full Down     | a −916 mm (−36 inches)     |
A −1396 mm (−55 inches)     |
Clearance at Maximum Height     | b 4390 mm (173 inches)     |
B 4826 mm (190 inches)     |
Minimum Reach at Full Down     | c 1624 mm (64 inches)     |
C 1815 mm (71.5 inches)     |
Maximum Reach     | d 2333 mm (92 inches)     |
D 2773 mm (109 inches)     |