2007/11/26 Caterpillar


An Improved Pressure Switch for Air Conditioners is Now Available {1435, 7320}

Usage:

416D BFP
Backhoe Loader:
416D (S/N: BFP1-UP)
416E (S/N: SHA1-UP; CBD1-UP)
420D (S/N: BLN1-UP; FDP1-UP)
420E (S/N: HLS1-UP; KMW1-UP)
422E (S/N: HBE1-UP)
428D (S/N: BXC1-UP; DSX1-UP)
428E (S/N: SNL1-UP)
430E (S/N: DDT1-UP; EAT1-UP)
432D (S/N: WEP1-UP; TDR1-UP)
432E (S/N: BXE1-UP)
442D (S/N: TBD1-UP; SMJ1-UP)
444E (S/N: LBE1-UP)
Integrated Toolcarrier:
IT14G (S/N: FWL1-UP)
Multi Terrain Loader:
247B (S/N: MTL1-UP)
257B (S/N: SLK1-UP)
267B (S/N: CYC1-UP)
277B (S/N: MDH1-UP)
287B (S/N: ZSA1-UP)
Skid Steer Loader:
226B (S/N: MJH1-UP)
236B (S/N: HEN1-UP)
242B (S/N: BXM1-UP)
246B (S/N: PAT1-UP)
248B (S/N: SCL1-UP)
252B (S/N: SCP1-UP)
262B (S/N: PDT1-UP)
262C (S/N: MST1-UP)
268B (S/N: LBA1-UP)
Telehandler:
TH360B (S/N: SLE1-UP)
Track-Type Tractor:
D3G (S/N: JMH1-UP; BYR1-UP)
D4G (S/N: HYD1-UP; TLX1-UP)
D5G (S/N: WGB1-UP; RKG1-UP)
Wheel Loader:
914G (S/N: PDF1-UP)
924G (S/N: DDA1-UP; WMB1-UP)
928G (S/N: DJD1-UP)
930G (S/N: TWR1-UP; TFW1-UP)

The 236-6923 Pressure Switch (REFRIGERANT) that is used in the machines that are listed above has been improved.

Determine the date code (2) that is on the 236-6923 Pressure Switch. If the date code is 6335 or higher, then the improved switch is installed on your machine.




Illustration 1g01436050

The 236-6923 Pressure Switch is shown. The date code (2) is stamped below the part number (1) of the switch.

Note: The date code is in the format 'NNNNXX'. The 'NNNN' represents a four digit number. The 'XX' at the end of the number is a special identifier. This identifier can be ignored.

Caterpillar Information System:

Relocation of the Fumes Disposal Tube{1317} Relocation of the Fumes Disposal Tube{1317}
320D and 323D Excavators Machine System Specifications Joystick Control
992K Wheel Loader Electrohydraulic System Pressure Switch (Filter Bypass)
854K Wheel Dozer Hydraulic System Oil Filter (Hydraulic Fan)
992K Wheel Loader and 854K Wheel Dozer Power Train Transmission Oil Pump
854K Wheel Dozer Hydraulic System Oil Filter (Implement Pilot)
2007/12/10 Correction to Systems Operation Troubleshooting Testing and Adjusting , "MID 027 - CID 0444 - FMI 06" {1426, 5479}
2007/12/10 Correction to Systems Operation Troubleshooting Testing and Adjusting , "MID 027 - CID 0444 - FMI 05" {1426, 5479}
2008/04/28 Correction to Systems Operation Troubleshooting Testing and Adjusting , "MID 027 - CID 0444 - FMI 03" {1426}
994F Wheel Loader Machine Systems Selector Valve (Hydraulic) - Install
994F Wheel Loader Machine Systems Selector Valve (Hydraulic) - Remove
992K Wheel Loader and 854K Wheel Dozer Power Train Relief Valve (Torque Converter Outlet) - Install
2008/04/07 Components That Are Available To Repair Bails {6062, 6262, 7115}
992K Wheel Loader Electrohydraulic System Pilot Oil Accumulator
IT38H Integrated Toolcarrier and 938H Wheel Loader Transmission Electronic Control System Wiring Harness (Open Circuit) - Test
992G Wheel Loader Electrohydraulic System Pressure Sensor (Implement Pilot Oil)
319D Excavator Hydraulic System Hydraulic Tank and Filter
993K Wheel Loader Rear Access Egress System Rolling Guards - Clean - If Equipped
994F Wheel Loader Machine Systems Gear Pump (Brake Cooling) - Remove
319D Excavator Hydraulic System Hydraulic Oil Cooler
994F Wheel Loader Machine Systems Diverter Valve (Secondary Steering) - Remove
319D Excavator Hydraulic System Oil Filter (Return) - Case Drain Filter
312D2 and 313D2 Excavator Machine Systems Swing Drive
319D Excavator Hydraulic System Pilot Valve (Swing Parking Brake)
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.