854K Wheel Dozer Hydraulic System Caterpillar


Oil Filter (Implement Pilot)

Usage:

854K 221



Illustration 1g01433721

(1) Final installation torque for the pressure switch ... 48 ± 5 N·m (35 ± 4 lb ft)

(A) Minimum clearance that is needed in order to remove the oil filter ... 25.4 mm (1.00 inch)

Pressure setting for the bypass valve ... 172 kPa (25 psi)

Caterpillar Information System:

2007/12/10 Correction to Systems Operation Troubleshooting Testing and Adjusting , "MID 027 - CID 0444 - FMI 06" {1426, 5479}
2007/12/10 Correction to Systems Operation Troubleshooting Testing and Adjusting , "MID 027 - CID 0444 - FMI 05" {1426, 5479}
2008/04/28 Correction to Systems Operation Troubleshooting Testing and Adjusting , "MID 027 - CID 0444 - FMI 03" {1426}
994F Wheel Loader Machine Systems Selector Valve (Hydraulic) - Install
994F Wheel Loader Machine Systems Selector Valve (Hydraulic) - Remove
992K Wheel Loader and 854K Wheel Dozer Power Train Relief Valve (Torque Converter Outlet) - Install
992K Wheel Loader and 854K Wheel Dozer Power Train Relief Valve (Torque Converter Outlet) - Assemble
992K Wheel Loader and 854K Wheel Dozer Power Train Relief Valve (Torque Converter Outlet) - Disassemble
992K Wheel Loader and 854K Wheel Dozer Power Train Relief Valve (Torque Converter Outlet) - Remove
IT38H Integrated Toolcarrier and 938H Wheel Loader Fuel System - Prime
993K Wheel Loader Rear Access Egress System Oil Sample - Obtain - If Equipped
938H Wheel Loader and IT38H Integrated Toolcarrier Power Train Electrical Schematic
992K Wheel Loader and 854K Wheel Dozer Power Train Transmission Oil Pump
854K Wheel Dozer Hydraulic System Oil Filter (Hydraulic Fan)
992K Wheel Loader Electrohydraulic System Pressure Switch (Filter Bypass)
320D and 323D Excavators Machine System Specifications Joystick Control
Relocation of the Fumes Disposal Tube{1317} Relocation of the Fumes Disposal Tube{1317}
2007/11/26 An Improved Pressure Switch for Air Conditioners is Now Available {1435, 7320}
2008/04/07 Components That Are Available To Repair Bails {6062, 6262, 7115}
992K Wheel Loader Electrohydraulic System Pilot Oil Accumulator
IT38H Integrated Toolcarrier and 938H Wheel Loader Transmission Electronic Control System Wiring Harness (Open Circuit) - Test
992G Wheel Loader Electrohydraulic System Pressure Sensor (Implement Pilot Oil)
319D Excavator Hydraulic System Hydraulic Tank and Filter
993K Wheel Loader Rear Access Egress System Rolling Guards - Clean - If Equipped
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.