MID 081 - CID 1693 - FMI 13
Conditions Which Generate This Code:
Show/hide table
 | |
| Illustration 1 | g01341036 |
Schematic for the Position Sensor (Decelerator Pedal) | |
This diagnostic code is recorded when the Machine ECM determines that the Deceleration Pedal Sensor requires calibration.
Test Step 1. CALIBRATE THE DECELERATION PEDAL SENSOR
- Perform the necessary calibration procedure for the switch. Refer to Testing and Adjusting, RENR8959, "Position Sensor (Left Brake Pedal) (Decelerator) (Electronic Technician) - Calibrate" procedure.
Expected Result:
The calibration procedure for the switch was performed successfully.
Results:
- YES - The calibration procedure for the switch was performed successfully. Resume normal machine operation.STOP
- NO - The calibration procedure for the switch was not performed successfully.
Repair: Repeat the calibration procedure for the switch. Refer to Testing and Adjusting, RENR8959, "Position Sensor (Left Brake Pedal) (Decelerator) (Electronic Technician) - Calibrate" procedure.
STOP
Caterpillar Information System:
816F Series 2 Landfill Compactor, 815F Series 2 Soil Compactor and 814F Series 2 Wheel Dozer MID 081 - CID 1693 - FMI 04
816F Series 2 Landfill Compactor, 815F Series 2 Soil Compactor and 814F Series 2 Wheel Dozer MID 081 - CID 1693 - FMI 03
Replacement of the 124-4672 Pressure Sensor for the Payload Control System {1439, 7494} Replacement of the 124-4672 Pressure Sensor for the Payload Control System {1439, 7494}
816F Series 2 Landfill Compactor, 815F Series 2 Soil Compactor and 814F Series 2 Wheel Dozer MID 081 - CID 1693 - FMI 01
816F Series 2 Landfill Compactor, 815F Series 2 Soil Compactor and 814F Series 2 Wheel Dozer MID 081 - CID 1693 - FMI 00
816F Series 2 Landfill Compactor, 815F Series 2 Soil Compactor and 814F Series 2 Wheel Dozer MID 081 - CID 0562 - FMI 09
D6T Track-Type Tractor Hydraulic System Control Valve (Bulldozer Tilt) - Standard
953D Track-Type Loader Hydraulic System Lift Circuit
2007/01/01 Improved End Bits and the Rework Procedure are Available for the Bulldozer Blade {6804}
IT38H Integrated Toolcarrier and 938H Wheel Loader Engine Supplement Engine Compartment Shield - Remove and Install
AD55B Underground Articulated Truck Power Train Electronic Control System Backup Alarm Always On
AD55B Underground Articulated Truck Power Train Electronic Control System System Schematic
816F Series 2 Landfill Compactor, 815F Series 2 Soil Compactor and 814F Series 2 Wheel Dozer MID 081 - CID 1711 - FMI 03
IT38H Integrated Toolcarrier and 938H Wheel Loader Engine Supplement Fan and Gear Motor (Hydraulic Fan) - Remove
IT62H Integrated Toolcarrier and 950H and 962H Wheel Loaders Sound Information and Vibration Information
2007/01/15 Special Tall Flange Rollers Are Now Available {4180}
AD55B Underground Articulated Truck Power Train Electronic Control System Backup Alarm Always Off
3306C Engines for Caterpillar Built Machines Fan Drive
C4.4 and C6.6 Engines for Caterpillar Built Machines System Configuration Parameters
816F Series 2 Landfill Compactor, 815F Series 2 Soil Compactor and 814F Series 2 Wheel Dozer MID 081 - CID 1711 - FMI 04
816F Series 2 Landfill Compactor, 815F Series 2 Soil Compactor and 814F Series 2 Wheel Dozer MID 081 - CID 1757 - FMI 03
816F Series 2 Landfill Compactor, 815F Series 2 Soil Compactor and 814F Series 2 Wheel Dozer MID 081 - CID 1757 - FMI 04
C4.4 and C6.6 Industrial Engines and Engines for Caterpillar Built Machines Can Not Reach Top Engine RPM
IT38H Integrated Toolcarrier and 938H Wheel Loader Engine Supplement Aftercooler - Remove and Install