IT38H Integrated Toolcarrier and 938H Wheel Loader Engine Supplement Caterpillar


Engine Compartment Shield - Remove and Install

Usage:

938H JKM

Removal Procedure

Start By:

  1. Remove the cooling system package. Refer to Disassembly and Assembly, "Cooling System Package (Radiator, Fan, Aftercooler, Oil Cooler) - Remove".



    Illustration 1g01341016

  1. Place the cooling system package on suitable cribbing, as shown.



    Illustration 2g01341017

  1. Disconnect hose (1). Disconnect hose (2) and remove tube (3). Disconnect hose (4) and remove tube (5) .



    Illustration 3g01341019

  1. Disconnect hose (6). Remove bolts (7) and (8). Remove expansion tank (9) .



    Illustration 4g01341020

  1. Disconnect hose assembly (10) .



    Illustration 5g01341021

  1. Remove bolts (11) and (13). Repeat for the other side. Remove engine compartment shield (12) .

Installation Procedure




    Illustration 6g01341021

  1. Install engine compartment shield (12). Install bolts (11) and (13). Repeat for the other side.



    Illustration 7g01341020

  1. Connect hose assembly (10) .



    Illustration 8g01341019

  1. Install expansion tank (9). Install bolts (7) and (8). Connect hose (6).



    Illustration 9g01341017

  1. Install tube (3) and connect hose (2). Install tube (5) and connect hose (4). Connect hose (1) .

End By: Install the cooling system package. Refer to Disassembly and Assembly, "Cooling System Package (Radiator, Fan, Aftercooler, Oil Cooler) - Install".

Caterpillar Information System:

AD55B Underground Articulated Truck Power Train Electronic Control System Backup Alarm Always On
AD55B Underground Articulated Truck Power Train Electronic Control System System Schematic
AD55B Underground Articulated Truck Power Train Electronic Control System Electronic Control Module (ECM) - Replace
AD55B Underground Articulated Truck Power Train Electronic Control System Hoist System Enable - Check
AD55B Underground Articulated Truck Power Train Electronic Control System Position Sensor (Body) - Calibrate
2007/06/11 Improved Monitoring for Primary and Secondary Steering is Now Used {4300, 4300, 7431}
AD55B Underground Articulated Truck Power Train Electronic Control System Transmission Clutch - Calibrate
AD55B Underground Articulated Truck Power Train Electronic Control System Speed Sensor - Replace
IT38H Integrated Toolcarrier and 938H Wheel Loader Engine Supplement Turbocharger - Install
Diesel Particulate Filter Monitoring System {108F, 7490} Diesel Particulate Filter Monitoring System {108F, 7490}
D3K, D4K and D5K Track-Type Tractors Electrohydraulic Power Train System Piston Pump (Hydrostatic)
D3K, D4K and D5K Track-Type Tractors Electrohydraulic Power Train System Piston Pump (Hydrostatic)
2007/01/01 Improved End Bits and the Rework Procedure are Available for the Bulldozer Blade {6804}
953D Track-Type Loader Hydraulic System Lift Circuit
D6T Track-Type Tractor Hydraulic System Control Valve (Bulldozer Tilt) - Standard
816F Series 2 Landfill Compactor, 815F Series 2 Soil Compactor and 814F Series 2 Wheel Dozer MID 081 - CID 0562 - FMI 09
816F Series 2 Landfill Compactor, 815F Series 2 Soil Compactor and 814F Series 2 Wheel Dozer MID 081 - CID 1693 - FMI 00
816F Series 2 Landfill Compactor, 815F Series 2 Soil Compactor and 814F Series 2 Wheel Dozer MID 081 - CID 1693 - FMI 01
Replacement of the 124-4672 Pressure Sensor for the Payload Control System {1439, 7494} Replacement of the 124-4672 Pressure Sensor for the Payload Control System {1439, 7494}
816F Series 2 Landfill Compactor, 815F Series 2 Soil Compactor and 814F Series 2 Wheel Dozer MID 081 - CID 1693 - FMI 03
816F Series 2 Landfill Compactor, 815F Series 2 Soil Compactor and 814F Series 2 Wheel Dozer MID 081 - CID 1693 - FMI 04
816F Series 2 Landfill Compactor, 815F Series 2 Soil Compactor and 814F Series 2 Wheel Dozer MID 081 - CID 1693 - FMI 13
816F Series 2 Landfill Compactor, 815F Series 2 Soil Compactor and 814F Series 2 Wheel Dozer MID 081 - CID 1711 - FMI 03
IT38H Integrated Toolcarrier and 938H Wheel Loader Engine Supplement Fan and Gear Motor (Hydraulic Fan) - Remove
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.