Metric Tap And Rethreading Dies Available{0600}
Usage:
Some Caterpillar products use metric bolts, studs, and nuts. Therefore, a set of taps and a set of rethreading dies to repair metric threads are now available. Each set contains 18 sizes from M4 × 0.7 through M16 × 2.0. (The "M" means metric; 16 × 2.0 means 16 mm diameter threads and 2 mm between each thread.) Individual taps and rethreading dies are also available as listed.
Caterpillar Information System:
1985/06/17 Inspection And Installation Procedures For Water Pump Shaft And Seals{1361,1389,1373}
1985/06/10 New Rust Preventive Used In Part Distribution System{0645}
1985/06/10 New Service Tools Available{0600}
1985/06/10 Higher Torque Can Be Used With 6V6980 Nozzle Puller Group{0706,1254}
1985/06/10 Clamps Removed From Turbocharger Oil Lines Group{1300,1307}
1985/06/10 New Degree Wheel Available For Measuring Torque Turn Angles{0600}
1985/06/03 Engine Slobbering{1059,1050}
1985/06/03 Improving Block Load Response{7002}
1985/06/03 Check 5P7435 Tee Adapter Groups In The 6V3100 Engine Timing Indicator Groups{0782}
1985/06/03 Excessive Antifreeze Concentrations Can Cause Overheating{1350,1101}
1985/06/03 New Crankshaft Seals Used{1160,1161,1202}
1985/06/03 Preventing Skin Irritation From Petroleum Test Fluids{0353}
1985/06/17 New Oil Seal And Coolant Seal Group Improve Service Life Of Engine Water Pump{1361,1389,1373}
1985/06/17 New Cylinder Blocks Permit The Use Of One Positive Crankcase Ventilation (PCV) Valve{1300,1074,1201}
1985/06/17 Oil Filter Inspection Can Save Additional Internal Engine Damage{1318}
1985/06/17 Self-Powered Hour (Service) Meter Group Available{7478}
1985/06/24 Orifice Fitting Or Snubber Can Help Stop Erratic Fuel Gauge Operation{7456}
1985/06/24 New Part Numbers Designate Crankshaft Use{1202}
1985/07/01 New Cylinder Heads And Fuel Nozzle Adapters Used{1101,1106}
1985/07/01 Voltage Regulator Cross Reference Chart{1410,1405}
1985/07/01 Battery Disconnect Switch Stops Battery Drain{1411}
1985/07/01 Fuel Return Tube Assembly Replaced By Hose Assembly{1274}
1985/07/01 Breather Element Added To PCV Valve{1300,1074}
1985/07/01 Oil Pump Flow Increased{3310,3314}