Fuel Tank - Remove and Install
拆卸步骤
注: 清洁度是一项重要的因素。 拆解步骤开始之前,应彻底清洁部件外部。 这将有助于防止脏污进入内部机构。
注: 为便于安装,在所有管路、所有软管、所有线束组件及所有管上做出识别标记。 插接好所有线路、软管和管路。 这将有助于防止液体泄漏和有助于防止污染物进入系统。
Show/hide table
注意 |
---|
在检验、保养、测试、调整及维修发动机时,请小心确保盛接流出的液体。 在打开或拆解任何储有液体的部件之前,要准备好合适的容器收集液体。 有关适合收集和盛接卡特彼勒产品上的液体的工具和供应品,请参阅专门出版物, NENG2500, "卡特彼勒代理商工具目录"。 按照本地法规和条例处置所有液体。 |
- 将燃油箱中的油排入合适的容器以便保存或废弃这些油。 请参阅操作和保养手册, "加注容量"。
- 卸下防护罩 (1) ,断开软管 (3) 。
Show/hide table
图 1 | g01287393 |
- 重新将排气口组件 (2) 安置在旁边。
- 断开软管组件 (4) 。
Show/hide table
图 2 | g01287394 |
- 将适当的起吊设备连接在燃油箱 (5) 上。 燃油箱 (5) 的重量约为 500 kg (1100 lb)。
Show/hide table
图 3 | g01287399 |
- 卸下法兰 (6) ,断开线束组件 (7) 。
- 卸下螺栓 (8) 。
Show/hide table
图 4 | g01287401 |
- 断开软管 (9) 和软管组件 (10) 。
- 卸下螺栓 (11) 。
Show/hide table
图 5 | g01287397 |
- 使用适当的起吊设备,提起燃油箱 (5) 。
Show/hide table
图 6 | g01287403 |
- 从燃油箱 (5) 上卸下软管组件 (4) 。
- 卸下燃油箱 (5) 。
安装步骤
注: 清洁度是一项重要的因素。 组装之前,应使用清洗剂彻底清洁所有零件。 让零件风干。 不要使用抹布擦干零部件。 棉绒可能会留在零部件上,从而可能导致以后出现故障。 检查所有零件。 如果任何零件磨损或损坏,则应使用新件进行更换。
- 使用适当的起吊设备,将燃油箱 (5) 降到位,安装软管组件 (4) 。 燃油箱 (5) 的重量约为 500 kg (1100 lb)。
Show/hide table
图 7 | g01287403 |
- 在安装好软管组件 (4) 后,继续将燃油箱 (5) 降到位。
- 安装螺栓 (11) 。 拧紧螺栓 (11) 至扭矩为 250 ± 15 N·m (184 ± 11 lb ft)。
Show/hide table
图 8 | g01287397 |
- 安装螺栓 (8) 。 拧紧螺栓 (8) 至扭矩为 130 ± 10 N·m (96 ± 7 lb ft)。
Show/hide table
图 9 | g01287401 |
- 连接软管 (9) 和软管组件 (10) 。
- 将线束组件 (7) 连接到燃油箱 (5) 上,安装螺栓 (6) 。 拧紧螺栓 (6) 至扭矩为 130 ± 10 N·m (96 ± 7 lb ft)。
Show/hide table
图 10 | g01287399 |
- 连接软管组件 (4) 。
Show/hide table
图 11 | g01287394 |
- 安置排气口组件 (2) 。
Show/hide table
图 12 | g01287393 |
- 安装防护罩 (1) ,连接软管 (3) 。
Caterpillar Information System:
Index of Repair Process Engineering Publications {0374, 1000, 7000} Index of Repair Process Engineering Publications {0374, 1000, 7000}
Starting and Charging Systems Analyzer Test Description
657G Wheel Tractor-Scraper Wheel Tractor Power Train Service Brake - Install
657G Wheel Tractor-Scraper Wheel Tractor Power Train Service Brake - Remove
2006/07/17 A New Seal is Used for the Auxiliary Water Pump {1371}
2006/07/10 A New Seal is Used for the Auxiliary Water Pump {1371}
Starting and Charging Systems General Information
SystemOne Track Guiding Arrangements{4150, 4177} SystemOne Track Guiding Arrangements{4150, 4177}
525C, 535C and 545C Wheel Skidders Power Train Solenoid Valve (Transmission Clutch) - Test
2006/07/24 A New Cylinder Head Gasket is Used {1124}
2006/07/10 A Cylinder Head Gasket was Reinstated {1124}
C175-16 Locomotive Engine Aftercooler
Starting and Charging Systems Alternator Test Description
953D Track-Type Loader Engine Supplement Muffler - Remove and Install
525C, 535C and 545C Wheel Skidders Power Train Transmission Pressures - Test and Adjust
D3K, D4K and D5K Track-Type Tractors Electrohydraulic System Relief Valve (Main) - Test and Adjust
2006/07/17 A New Valve Cover Seal is Now Used {1107, 1120}
814F Series 2 Wheel Dozer, 815F Series 2 Soil Compactor and 816F Series 2 Landfill Compactor Steering System Metering Pump (HMU Steering)
657G Wheel Tractor-Scraper Machine Systems Bail Cylinder - Remove and Install
Starting and Charging Systems Reference Information
953D Track-Type Loader Engine Supplement Air Cleaner - Remove and Install
657G Wheel Tractor-Scraper Wheel Tractor Power Train Gear Pump (Transmission Scavenge) - Remove
657G Wheel Tractor-Scraper Wheel Tractor Power Train Gear Pump (Transmission Scavenge) - Install
657G Wheel Tractor-Scraper Wheel Tractor Power Train Solenoid Valve (Differential Lock) - Remove and Install