Service Brake - Remove
拆卸步骤
Show/hide table
所需工具     | |||
工具     | 零件号     | 零件名称     | 数量     |
A     | 5P-0167     | 制动器弹簧工具     | 1     |
B     | 2P-8312     | 挡圈钳     | 1     |
C     | -     | 顶出螺钉 5/8 - 11 x 4 in     |
3     |
开始:
- 卸下轮胎和车轮。 请参阅拆解和组装, "车轮、车轮轴承和 Duo-Cone 浮式密封 - 拆卸"。
注: 清洁度是一项重要的因素。 拆解步骤开始之前,应彻底清洁部件外部。 这将有助于防止脏污进入内部机构。
- 卸下防尘罩 (1) 。 使用工具 (A) ,从制动蹄组件 (3) 上卸下弹簧 (2) 。
Show/hide table
图 1 | g01287410 |
Show/hide table
被弹簧力爆出的零件击中,会招致人员伤害。 确保穿上所有必要的保护装备。 遵照建议的程序,并使用所有建议的工具以释放弹簧力。 |
- 从螺栓 (5) 上卸下钢丝 (4) 。 卸下将销 (6) 固定在车轴壳体上的螺栓 (5) 。
Show/hide table
图 2 | g00850962 |
- 卸下将制动蹄组件 (3) 固定在车轴壳体上的销 (6) 和弹簧锁。 需要他人帮助来卸下制动蹄组件 (3) 。 制动蹄组件 (3) 的重量约为 45 kg (100 lb)。
- 使用工具 (B) ,移开挡圈 (7) 。
Show/hide table
图 3 | g00850963 |
- 部分卸下凸轮轴 (8) ,卸下松紧调整器 (9) 。 卸下挡圈 (7) ,卸下垫圈 (10) 。 卸下凸轮轴 (8) 。 从凸轮轴 (8) 上卸下垫圈 (11) 。
Show/hide table
图 4 | g01287412 |
- 卸下唇形密封 (12) 。 卸下滚针轴承 (13) 。
Show/hide table
图 5 | g00850965 |
- 拆下螺栓 (14) 。 将工具 (C) 安装到制动鼓组件 (15) 上,升起制动鼓组件 (15) 。 将适当的起吊设备连接在制动鼓组件 (15) 上。 制动鼓组件 (15) 的重量约为 111 kg (245 lb)。 卸下制动鼓组件 (15) 。 卸下防尘罩 (16) 。
Show/hide table
图 6 | g01287915 |
Show/hide table
图 7 | g01287917 |
- 卸下螺栓 (16) 锁紧钢丝。 卸下螺栓 (16) 。 卸下销组件 (17) 。 卸下滚柱 (18) 。
Show/hide table
图 8 | g01288163 |
Caterpillar Information System:
2006/07/17 A New Seal is Used for the Auxiliary Water Pump {1371}
2006/07/10 A New Seal is Used for the Auxiliary Water Pump {1371}
Starting and Charging Systems General Information
SystemOne Track Guiding Arrangements{4150, 4177} SystemOne Track Guiding Arrangements{4150, 4177}
525C, 535C and 545C Wheel Skidders Power Train Solenoid Valve (Transmission Clutch) - Test
2006/07/24 A New Cylinder Head Gasket is Used {1124}
2006/07/10 A Cylinder Head Gasket was Reinstated {1124}
C175-16 Locomotive Engine Aftercooler
657G Wheel Tractor-Scraper Wheel Tractor Power Train Drive Shaft - Assemble
657G Wheel Tractor-Scraper Wheel Tractor Power Train Axle Shaft - Remove and Install
657G Wheel Scraper Power Train Torque Converter - Install
657G Wheel Scraper Power Train Torque Converter - Remove
657G Wheel Tractor-Scraper Wheel Tractor Power Train Service Brake - Install
Starting and Charging Systems Analyzer Test Description
Index of Repair Process Engineering Publications {0374, 1000, 7000} Index of Repair Process Engineering Publications {0374, 1000, 7000}
657G Wheel Tractor-Scraper Machine Systems Fuel Tank - Remove and Install
Starting and Charging Systems Alternator Test Description
953D Track-Type Loader Engine Supplement Muffler - Remove and Install
525C, 535C and 545C Wheel Skidders Power Train Transmission Pressures - Test and Adjust
D3K, D4K and D5K Track-Type Tractors Electrohydraulic System Relief Valve (Main) - Test and Adjust
2006/07/17 A New Valve Cover Seal is Now Used {1107, 1120}
814F Series 2 Wheel Dozer, 815F Series 2 Soil Compactor and 816F Series 2 Landfill Compactor Steering System Metering Pump (HMU Steering)
657G Wheel Tractor-Scraper Machine Systems Bail Cylinder - Remove and Install
Starting and Charging Systems Reference Information