Bulldozer Brace
Show/hide table
Illustration 1 | g01731916 |
(1) Retracted position
(2) Neutral position
(3) Use 8E-5703 Shims to obtain a clearance of 0.3 to 0.8 mm (0.012 to 0.032 inch) with the trunnion balls, as required.
(4) Torque for bolts ... 520 ± 70 N·m (385 ± 50 lb ft)
(5) Extended position
(6) Use 8E-5701 Shims, as required.
Caterpillar Information System:
D6G Series 2 Track-Type Tractor Additional Messages
953D Track-Type Loader Machine Systems Fuel Tank - Install
3176C Engines for Caterpillar Built Machines Sensors and Electrical Connectors
657G Wheel Tractor-Scraper Machine Systems Heater Coil - Remove and Install
657G Wheel Tractor-Scraper Machine Systems Evaporator Coil - Remove and Install
953D Track-Type Loader Machine Systems Fuel Tank - Remove
657G Wheel Tractor-Scraper Machine Systems Air Tank - Remove and Install
657G Wheel Tractor-Scraper Machine Systems Blower Motor (Air Conditioner and Heater) - Remove and Install
D6K Track-Type Tractor Power Train Piston Pump (Hydrostatic) - Assemble - Right Side
D6K Track-Type Tractor Power Train Piston Pump (Hydrostatic) - Disassemble - Right Side
D6K Track-Type Tractor Power Train Piston Pump (Hydrostatic) - Assemble - Left Side
D6K Track-Type Tractor Power Train Piston Pump (Hydrostatic) - Disassemble - Left Side
D6G Series 2 Track-Type Tractor Bulldozer Tilt Brace - Lubricate - If Equipped
3500 Generator Sets Overhaul Considerations
657G Wheel Tractor-Scraper Wheel Tractor Power Train Gear Pump (Transmission) - Remove
D6N Track-Type Tractor Machine Systems Radiator Guard and Support
657G Wheel Tractor-Scraper Machine Systems Window Wiper and Wiper Motor - Remove and Install
657G Wheel Tractor-Scraper Wheel Tractor Power Train Retarder and Transfer Gear - Install
657G Wheel Tractor-Scraper Machine Systems Seat - Remove and Install
657G Wheel Tractor-Scraper Machine Systems Seat Suspension - Remove and Install
657G Wheel Tractor-Scraper Machine Systems Steering Control - Remove and Install
953D Track-Type Loader Machine Systems Piston Pump (Implement) - Disassemble
953D Track-Type Loader Machine Systems Piston Pump (Implement) - Assemble
966H and 972H Wheel Loaders Power Train Speed Sensor (Torque Converter Output) (Transmission Output)