D8T Track-Type Tractor Machine Systems Caterpillar


Fast Fill Fuel Adapter

Usage:

D8T FCT


Illustration 1g06153564

Table 1
Specification for 217-7901 Fast Fill Fuel Adapter Gp 
Item  Qty  Part  Specification Description 
105-3484 Bolt  Torque to 3.4 ± 1.0 N·m (30.1 ± 8.9 lb in)
5P-2618 Connector  Torque to 13.0 ± 3.0 N·m (115.1 ± 26.6 lb in)

Caterpillar Information System:

D8T Track-Type Tractor Machine Systems Fast Fill Fuel Adapter
631G and 637G Wheel Tractor-Scrapers Auger Hydraulic System Gear Pump (Auger)
3508 EUI Engine for Off-Highway Truck/Tractors Auxiliary Water Pump
657G Wheel Tractor-Scraper Machine Systems Push-Pull Hook - Remove and Install
854K Wheel Dozer Cooling System Coolant (ELC) - Change
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer CID 2766 FMI 02 Intermediate Engine Speed Switch erratic, intermittent, or incorrect
3508 EUI Engine for Off-Highway Truck/Tractors Fan Drive
525C Wheel Skidder, 535C Wheel Skidder and 545C Wheel Skidder Power Train Transmission Case and Parts Group
C4.4 Industrial Engine Flywheel Housing - Inspect
D6G Series 2 Track-Type Tractor Hydraulic System Bulldozer Lift Control Valve
C4.4 Industrial Engine Flywheel - Inspect
D9T Track-Type Tractor Machine Systems Fast Fill Fuel Adapter
525C, 535C and 545C Wheel Skidders Power Train Drive Shaft (Center) - Remove and Install
657G Wheel Scraper Power Train Drive Shaft - Remove and Install
854K Wheel Dozer Safety Messages
3508 EUI Engine for Off-Highway Truck/Tractors Cylinder Block
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer Engine Temperature Sensor Open or Short Circuit - Test
C4.4 Industrial Engine Air Inlet and Exhaust System - Inspect
2006/05/29 Updated Plate Assembly Eliminates Interference For the Cable On the Cab Heater {7304}
657G Wheel Tractor-Scraper Wheel Tractor Power Train Retarder Hydraulic Control Valve - Disassemble
657G Wheel Tractor-Scraper Wheel Tractor Power Train Retarder Hydraulic Control Valve - Assemble
657G Wheel Scraper Power Train Retarder Hydraulic Control Valve - Remove
657G Wheel Scraper Power Train Retarder Hydraulic Control Valve - Install
2014/08/14 Do Not Reuse the Hold Down Bolts for the Fuel Injectors On All Products that Contain C9 Through C32 Engines {1290}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.