Procedure for MVP Field Installation{7620} Caterpillar

Procedure for MVP Field Installation{7620}

Usage:

D5N AGG

Track-Type Tractor:: D5N (S/N: AKD1-UP; AGG1-UP; CFH1-UP; CKT1-UP); D6N (S/N: CBF1-UP; CCG1-UP; ALH1-UP; CBJ1-UP; CCK1-UP; CBL1-UP; AKM1-UP; ALR1-UP; CCS1-UP; ALY1-UP)

Introduction

This special instruction provides an installation procedure for the new MVP software. Multi Velocity Program (MVP) is a system integration strategy that relies on communication between the engine, the transmission, and the monitoring system.

Parts

These are in the free package available from Caterpillar Program Headquarters at 1-800-810-7854 (Outside the USA send a FAX to 309-578-2559 or an e-mail to Targeted_Marketing@Cat.com).

Show/hide table

Table 1
Parts
Qty	Description
1	281-7752 Film
1	this Special Instruction REHS3083
1	Operation and Maintenance Manual (OMM - English Media Numbers) SEBU7418-06 or newer for D5N (S/N: AGG1-UP; AKD1-UP; CFH1-UP; CKT1-UP) or SEBU7417-06 or newer for D6N Differential Steering (S/N: CCK1-UP; CBL1-UP; AKM1-UP; CCS1-UP; ALY1-UP) or SEBU7416-06 or newer for D6N Finger Tip Control (S/N: CBF1-UP; CCG1-UP; ALH1-UP; CBJ1-UP; ALR1-UP)

Installation Procedure

MVP software that is applicable can be downloaded from SIS Web. A factory password will be required to complete the installation of MVP.

Show/hide table

Table 2
Part Numbers of the New MVP Software
	Part Number	Description
D5N Engine	283-1501	Engine Software
D6N Engine	276-7295	Engine Software
D6N and D5N Transmission	287-2112	Power Train Software
D6N and D5N Monitoring System	289-0554	Monitor Software

Show/hide table

Table 3
A $750Premium Feature Charge for the New MVP Software will Apply to the Following Machines.
D5N S/N:AGG1-1366	D6N S/N:ALH1-736
D5N S/N:AKD1-1162	D6N S/N:AKM1-1264
	D6N S/N:ALR1-641
	D6N S/N:ALY1-1366

Note: Because this is a system integration strategy, all of the above software must be installed on the machine.

After installation, machines will default to the three-speed configuration. Examples of the display are "1 F", "2 F", or "3 F". The following conditions must be met in order to enable System MVP:

Utilize ET version 2005B or later.
Go to the Steer/Brake/Transmission Configuration screen
Change MVP installation status to INSTALLED
Obtain the factory password to complete installation of MVP.
Conduct an orientation to the customer on the functionality of MVP. Refer to Operation and Maintenance Manual (OMM), "Operation".
Provide the operator with the latest revision of the Operation and Maintenance Manual.
After the machine is upgraded with MVP the transmission must be recalibrated and the new 281-7752 Film must be installed on the lamp/gear module.
Make a SIMS entry to get this modification into our records. (MVP installed on date)