- Instrument Cluster
- Switches
- Electronic Control Modules (ECM)
- Service Connector
Instrument Cluster
Illustration 1 | g01248979 |
Instrument Cluster |
The Instrument Cluster is located at the front of the operator's compartment directly in front of the steering column.
Switches
Illustration 2 | g01249392 |
(1) Service Mode switch (2) Torque Converter Lockup Clutch switch (3) Secondary Steering switch (4) Parking Brake switch |
Service Mode Switch
The Service Mode switch (1) is located on the left side of the Instrument Cluster.
Torque Converter Lockup Clutch Switch
The Torque Converter Lockup Clutch switch (2) is located on the right side of the Instrument Cluster.
Secondary Steering Switch
The Secondary Steering switch (3) is located on the left side of the Instrument Cluster.
Parking Brake Switch
The Parking Brake switch (4) is located on the right side of the Instrument Cluster.
Differential Lock Control Switch
Illustration 3 | g01249360 |
Differential Lock Control switch |
The Differential Lock Control switch is located on the side console.
ECM
ReferenceFor additional information about the ECM, refer to the Schematic, "525C / 535C / 545C Wheel Skidder Electrical System Schematic" for the machine that is being serviced.
Machine ECM
Illustration 4 | g01249367 |
Left rear side of the cab |
Illustration 5 | g01249390 |
(6) Machine ECM |
Illustration 6 | g01206487 |
Machine ECM |
The Machine Electronic Control Module (ECM) is located at the left rear side of the cab.
Remove the cover in Illustration 4 in order to gain access to the ECM.
Engine ECM
Illustration 7 | g01249408 |
(7) Engine ECM |
The Engine ECM is located on the left side of the engine.
Service Connector
Illustration 8 | g01249409 |
(8) Service connector |
The Service connector is located on the front console near the floor. The connector is used to connect service tools that are used for diagnostic purposes.