Fuel Tank Cap Filter and Strainer - Replace/Clean
Show/hide table
| |
| Illustration 1 | g01297937 |
- Remove the fuel tank cap (1).
- Disassemble the fuel tank cap.
- Inspect the seal on the fuel cap for damage. If the seal is damaged, replace the seal. Lubricate the seal on the fuel tank cap.
- Inspect the debris boot on the fuel tank cap for damage. if the debris boot is damaged, replace the boot.
- Replace the filter elements on the fuel tank cap.
- Remove the strainer from the filler opening.
- Wash the strainer from the filler opening.
- Install the strainer.
- Install the fuel tank cap.
Caterpillar Information System:
950H Wheel Loader, 962H Wheel Loader and IT62H Integrated Toolcarrier Electrohydraulic System General Information (Electrohydraulic System)
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks CID 0006 FMI 11 Cylinder #6 Injector fault
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks CID 0005 FMI 11 Cylinder #5 Injector fault
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks CID 0004 FMI 11 Cylinder #4 Injector fault
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks CID 0003 FMI 11 Cylinder #3 Injector fault
2005/10/17 New Software is Available to Add Controlled Throttle Shift Function {7620}
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks CID 0002 FMI 11 Cylinder #2 Injector fault
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks CID 0001 FMI 11 Cylinder #1 Injector fault
Removal and Installation of the 126-1774 Endbell Cover {7553} Removal and Installation of the 126-1774 Endbell Cover {7553}
950H Wheel Loader, 962H Wheel Loader and IT62H Integrated Toolcarrier Electrohydraulic System Main Control Valve
C11 and C13 Engines Water Pump
950H Wheel Loader, 962H Wheel Loader and IT62H Integrated Toolcarrier Electrohydraulic System Ride Control System
525C, 535C and 545C Wheel Skidders Grapple Grapple Cylinder Drift - Check
D6K Track-Type Tractor Ether Starting Aid Cylinder - Replace
525C, 535C and 545C Wheel Skidders Grapple Grapple Cylinder Speed - Check
D-Series and D2-Series Compact Track Loaders (CTL), Multi-Terrain Loaders (MTL), and Skid Steer Loaders (SSL) Drive Chain Case Oil - Check
C15 and C18 Engines for Caterpillar Built Machines Belt Tensioner
D6K Track-Type Tractor Engine Oil and Filter - Change
651B and 657B Wheel Tractor-Scrapers with a C15 Engine Tier III Repower Belts - Inspect/Adjust/Replace
525C, 535C and 545C Wheel Skidders Grapple Relief Valve (Line) - Test and Adjust
525C, 535C and 545C Wheel Skidders Hydraulic and Steering System Relief Valve (Pilot, Differential Lock) - Test and Adjust
C7 Engine for 584 and 584HD Forwarders and for 525C, 535C, and 545C Wheel Skidders CID 0001 FMI 05 Cylinder #1 Injector open circuit
Medium Wheel Loaders (MWL) Payload Control System (MWL) General Information
Medium Wheel Loaders (MWL) Payload Control System (MWL) Weighing Material