C9 Engines for Caterpillar Built Machines Caterpillar


General Information

Usage:

511 511
C9 发动机是一个直列六缸发动机。 发动机点火顺序为 "1-5-3-6-2-4"。 从发动机飞轮端观察发动机时,发动机为逆时针旋转。 发动机采用一个涡轮增压器。 发动机的缸径为 112 mm (4.41 in),冲程为 149 mm (5.87 in)。 排量为 8.8 L (537 cu in)

C9 发动机采用液压电子式单体喷油器 (HEUI) 进行燃油喷射。 HEUI 取消了用于泵和管路系统的很多机械部件。 HEUI 加强了对正时和空燃混合的控制。 通过精确控制单体喷油器正时,实现正时提前。 发动机转速是由调整喷油持续时间来控制的。 有一个特殊的脉冲轮向电子控制模块 (ECM) 提供信息,以便检测气缸位置和发动机转速。

发动机带有内置诊断功能,以确保所有部件正常工作。Caterpillar 电子技师 (ET) 可用于读取故障部件或状况的数字代码。 间歇性故障会记录和储存在存储器内。

起动发动机

发动机 ECM 将自动提供起动发动机所需的正确燃油量。 盘车起动发动机时不要踩下油门。 如果发动机无法在 20 秒内起动,释放起动开关。 再次使用起动马达前,先使其冷却 2 分钟。


注意

选装的自动乙醚喷射系统是唯一推荐使用的起动液系统。 乙醚过量使用会造成活塞和活塞环损坏。 只能在冷天起动时使用辅助起动液(乙醚)。


寒冷天气起动

寒冷天气发动机的起动和运转性能取决于燃油类型、机油粘度和其它选装的起动辅助装置。 更多有关资料,请参阅操作和保养手册, "寒冷天气操作"专题(保养部分)。

Caterpillar Information System:

904B Compact Wheel Loader Cab Air Filter - Clean/Replace
988H Wheel Loader Machine Systems Loader Frame to Rear Frame - Connect
C27 and C32 Engines for Caterpillar Built Machines Engine Fan Control Solenoid Circuit - Test
C11 and C13 Engines Engine Mounting
834H Wheel Dozer and 836H Landfill Compactor Power Train Final Drive and Wheel - Remove - Front
C15 and C18 Engines for Caterpillar Built Machines Elevated Idle
994F Wheel Loader Hydraulic System Torque Converter Stall and Implement Pump Double Stall - Test
621G, 623G and 627G Wheel Tractor-Scrapers Engine Supplement Alternator - Remove and Install
834H Wheel Dozer and 836H Landfill Compactor Machine Systems Brake Control Valve (Service) - Install
Rework Procedure for Dump Stops{6001} Rework Procedure for Dump Stops{6001}
994F Wheel Loader Machine Systems Ether Starting Aid
C7 Engine for 584 and 584HD Forwarders and for 525C, 535C, and 545C Wheel Skidders E194 High Exhaust Temperature
C15 and C18 Engines for Caterpillar Built Machines CID 1421 FMI 09 Unable to communicate with Rear Engine ECM
C9 Engines for Caterpillar Built Machines Lubrication System
627G, 637G and 657G Wheel Tractor-Scrapers Power Train Electronic Control System Wiring Harness (Short Circuit) - Test
621G, 623G, 627G, 631G, 637G, and 657G Wheel Tractor-Scrapers Power Train Electronic Control System Electrical Connector - Inspect
904B Compact Wheel Loader Capacities (Refill)
C9 Engines for Caterpillar Built Machines Cooling System - Test
904B Compact Wheel Loader Tire Shipping Pressure
992K Wheel Loader and 854K Wheel Dozer Machine Systems Window Wiper and Wiper Motor (Front, Rear)
904B Compact Wheel Loader Reference Material
C27 and C32 Generator Set Engines Fuel Transfer Pump - Install
2005/04/04 New Post Turn Seals Are Now Available {4169, 4171}
904B Wheel Loader Power Train Hydrostatic System
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.