1. Home
  2. Caterpillar
  3. Operation and Maintenance Manual
  4. #i02286771

904B Compact Wheel Loader Caterpillar


Power Train Oil Filter (Charge Pump) (Hydrostatic) - Replace

Usage:

904B B4L

  • Remove the hydraulic tank filler cap.
    Show/hide table
    Illustration 1g01144701
    Show/hide table
    Illustration 2g01144711

  • The filter (1) for the charge circuit is located on the left side of the machine by the articulation joint.

  • Remove the filter element with a strap type wrench.

  • Clean the filter element mounting base. Remove any part of the filter element gasket that remains on the filter element base.

  • Apply a light coat of oil to the gasket of the new filter element.

  • Install the new filter element by hand. When the gasket contacts the filter element mounting base, tighten the filter element for an additional three quarters of a turn.

  • Maintain the hydraulic oil level at the middle of the sight gauge. Add oil, if necessary.

  • Inspect the gasket on the hydraulic tank filler cap for damage. Replace the gasket, if necessary.

  • Install the hydraulic tank filler cap.

    • Caterpillar Information System:

    904B Compact Wheel Loader Hydraulic System Oil Filter (Return) - Replace
    C11 and C13 Industrial Engines Coolant Temperature Sensor - Remove and Install
    988H Wheel Loader Machine Systems Loader Frame from Rear Frame - Separate
    994F Wheel Loader Machine Systems Liquid Level Switch (Oil Renewal Metering Tank)
    904B Compact Wheel Loader Fuel Tank Cap - Clean
    C15 and C18 Engines for Caterpillar Built Machines Event Codes
    C15 and C18 Engines for Caterpillar Built Machines CID 0562 FMI 12 Wrong Response from Cat Monitoring System
    C15 and C18 Engines for Caterpillar Built Machines CID 0562 FMI 09 Unable to Communicate with Cat Monitoring System
    988H Wheel Loader Machine Systems Piston Pump (Implement) - Install
    904B Compact Wheel Loader Fuel System Filter and Water Separator - Replace
    657G Wheel Tractor-Scraper Operator Controls
    994F Wheel Loader Machine Systems Radiator
    904B Wheel Loader Power Train Visual Inspection
    904B Compact Wheel Loader Hydraulic System Oil - Change
    904B Wheel Loader Hydraulic and Steering System Hydraulic System Troubleshooting
    904B Wheel Loader Hydraulic and Steering System Steering System Troubleshooting
    994F Wheel Loader Machine Systems Metering Valve (Engine Oil) (Oil Renewal System)
    C7 Engine for 584 and 584HD Forwarders and for 525C, 535C, and 545C Wheel Skidders E194 High Exhaust Temperature
    994F Wheel Loader Machine Systems Ether Starting Aid
    Rework Procedure for Dump Stops{6001} Rework Procedure for Dump Stops{6001}
    834H Wheel Dozer and 836H Landfill Compactor Machine Systems Brake Control Valve (Service) - Install
    621G, 623G and 627G Wheel Tractor-Scrapers Engine Supplement Alternator - Remove and Install
    994F Wheel Loader Hydraulic System Torque Converter Stall and Implement Pump Double Stall - Test
    C15 and C18 Engines for Caterpillar Built Machines Elevated Idle
    Back to top
    Contacts My AVS
    The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
    CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.