C11 and C13 Industrial Engines Caterpillar


Coolant Temperature Sensor - Remove and Install

Usage:

C11 GLS


NOTICE

Keep all parts clean from contaminants.

Contaminants may cause rapid wear and shortened component life.



NOTICE

Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.

Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.

Dispose of all fluids according to local regulations and mandates.


Note: Drain the coolant level until the coolant is below the sensor.



Illustration 1g01144625

(1) Coolant temperature sensor ... 20 ± 5 N·m (15 ± 4 lb ft)

Caterpillar Information System:

988H Wheel Loader Machine Systems Loader Frame from Rear Frame - Separate
994F Wheel Loader Machine Systems Liquid Level Switch (Oil Renewal Metering Tank)
904B Compact Wheel Loader Fuel Tank Cap - Clean
C15 and C18 Engines for Caterpillar Built Machines Event Codes
C15 and C18 Engines for Caterpillar Built Machines CID 0562 FMI 12 Wrong Response from Cat Monitoring System
C15 and C18 Engines for Caterpillar Built Machines CID 0562 FMI 09 Unable to Communicate with Cat Monitoring System
988H Wheel Loader Machine Systems Piston Pump (Implement) - Install
904B Compact Wheel Loader Fuel System Filter and Water Separator - Replace
657G Wheel Tractor-Scraper Operator Controls
994F Wheel Loader Machine Systems Radiator
904B Wheel Loader Power Train Piston Pump (Hydrostatic)
904B Wheel Loader Power Train Machine Preparation for Troubleshooting
904B Compact Wheel Loader Hydraulic System Oil Filter (Return) - Replace
904B Compact Wheel Loader Power Train Oil Filter (Charge Pump) (Hydrostatic) - Replace
904B Wheel Loader Power Train Visual Inspection
904B Compact Wheel Loader Hydraulic System Oil - Change
904B Wheel Loader Hydraulic and Steering System Hydraulic System Troubleshooting
904B Wheel Loader Hydraulic and Steering System Steering System Troubleshooting
994F Wheel Loader Machine Systems Metering Valve (Engine Oil) (Oil Renewal System)
C7 Engine for 584 and 584HD Forwarders and for 525C, 535C, and 545C Wheel Skidders E194 High Exhaust Temperature
994F Wheel Loader Machine Systems Ether Starting Aid
Rework Procedure for Dump Stops{6001} Rework Procedure for Dump Stops{6001}
834H Wheel Dozer and 836H Landfill Compactor Machine Systems Brake Control Valve (Service) - Install
621G, 623G and 627G Wheel Tractor-Scrapers Engine Supplement Alternator - Remove and Install
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.