Steering Control Valve - Install
Show/hide table
Required Tools | |||
---|---|---|---|
Tool | Part Number | Part Description | Qty |
A | 138-7575 | Link Bracket | 2 |
Note: Check the O-ring seals for damage. Replace the components, if necessary.
- Install Tooling (A) and a suitable lifting device to steering control valve (1). The weight of the steering control valve is approximately
45 kg (98 lb) . Install steering control valve (1) and three bolts (10).Show/hide tableIllustration 2 g01092189 - Install the O-ring seal to manifold (7).
- Position manifold (7) and hose assembly (9), as shown. Connect hose assemblies (6) and (8).
Show/hide table
Illustration 3 g01092188 - Connect hose assemblies (2), (3), (4), and (5) to steering control valve (1).
- Fill the hydraulic tank with oil to the correct level. Refer to Operation and Maintenance Manual, "Hydraulic System Oil Level - Check".
Show/hide table
Illustration 1 | g01092190 |
End By:
- Separate the steering frame lock. Refer to Disassembly and Assembly, "Steering Frame Lock - Separate and Connect".
Caterpillar Information System:
AD55 Underground Articulated Truck Steering Control Valve - Remove
D8T, D9T and D11T Track-Type Tractors Monitoring System Service Menu
D10T, D11T, D8T and D9T Track-Type Tractors Monitoring System Auto Carry Menu
988H Wheel Loader Power Train Autoshift Control
834H Wheel Dozer and 836H Landfill Compactor Hydraulic System Oil Level - Check
834H Wheel Dozer and 836H Landfill Compactor Fuel Tank Water and Sediment - Drain
834H Wheel Dozer and 836H Landfill Compactor Electrohydraulic System Hydraulic Fan System
834H Wheel Dozer and 836H Landfill Compactor Backup Alarm - Test
Bench Test Procedure for a D6H Track-Type Tractor Transmission {3030, 3073} Bench Test Procedure for a D6H Track-Type Tractor Transmission {3030, 3073}
834H Wheel Dozer and 836H Landfill Compactor Axle Oscillation Bearings - Lubricate
834H Wheel Dozer and 836H Landfill Compactor Axle Oil Cooler Filter - Replace - If Equipped
623E Wheel Tractor-Scraper Hydraulic System Vane Pump (Hydraulic, Steering)
AD30 Underground Articulated Truck C15 Engine Supplement System Pressure - Release
973C Track-Type Loader Engine Supplement Water Temperature Regulator - Remove and Install
D10T Track-Type Tractor Hydraulic System Electrohydraulic Pilot Manifold - Test
973C Track-Type Loader Engine Supplement Water Pump - Remove
973C Track-Type Loader Engine Supplement Water Pump - Install
973C Track-Type Loader Power Train Pump Drive - Remove
IT28G Integrated Toolcarrier and 924G, 924GZ, 928G and 930G Wheel Loaders Engine Oil and Filter - Change
973C Track-Type Loader Powertrain Pump Drive - Install
IT28G Integrated Toolcarrier and 924G, 924GZ, 928G and 930G Wheel Loaders Hydraulic System Oil Filter - Replace
637G Wheel Tractor-Scraper Wheel Tractor Power Train Drive Shaft - Remove and Install
988H Wheel Loader Machine Systems Piston Motor (Hydraulic Fan) - Disassemble
988H Wheel Loader Machine Systems Piston Motor (Hydraulic Fan) - Assemble