Fuel Filter Base
Show/hide table
 | |
| 图 1 | g01221637 |
(1) 在螺柱锥形端的以下距离处涂抹 155-0695 螺纹锁固胶 。 ... 7.6 ± 1.5 mm
(0.30 ± 0.06 in)
(2) 螺柱扭矩 ... 68 ± 7 N·m
(50 ± 5 lb ft)
Caterpillar Information System:
C9-XQ300 Rental Generator Set Fan Drive Bearing - Lubricate - if equipped
C-12 Generator Set Engine System Configuration Parameters
C7 Petroleum Engines Fuel Filter Base
2005/10/03 Improved Thermocouples are Now Used {7498}
TH48-E80 Oil/Gas Transmission Transfer Gears - Assemble - Auxiliary
TH48-E80 Oil/Gas Transmission Transfer Gears - Disassemble - Auxiliary
TH48-E80 Oil/Gas Transmission Transfer Gears - Assemble - Idler
C-12 Generator Set Engine Ether Injection System - Test
C4.4 and C6.6 Industrial Engines and Engines for Caterpillar Built Machines CID 1785 FMI 10
345C MHPU Mobile Hydraulic Power Unit Machine Systems Swing Drive - Install
C-12 Generator Set Engine Event Codes
2005/08/01 New Serial Number Prefix {1000}
C7 On-highway Engine Fuel Filter Base
TH48-E80 Petroleum Transmission Power Train Electronic Control System System Schematic
C-12 Generator Set Engine Analog Sensor Supply Circuit - Test
C15 Generator Set Engines System Configuration Parameters
TH48-E80 Oil/Gas Transmission Transmission Planetary - Remove
TH48-E80 Oil/Gas Transmission Transmission Planetary - Install
C-12 Generator Set Engine Engine Pressure Sensor Open or Short Circuit - Test
C-12 Generator Set Engine Engine Temperature Sensor Open or Short Circuit - Test
2005/10/03 New Inlet Valve Seats are Now Used {1103}
TH48-E80 Oil/Gas Transmission Transmission Hydraulic Control - Disassemble
TH48-E80 Oil/Gas Transmission Transfer Gear Planetary (Speed Increase) - Remove
TH48-E80 Oil/Gas Transmission Transfer Gear Planetary (Speed Increase) - Install