C9-XQ300 Rental Generator Set Caterpillar


Fan Drive Bearing - Lubricate - if equipped

Usage:

C9 X3R


Illustration 1g01197086
Typical location of the grease fitting that is for the fan drive bearing
The pulley is shown with the belt guards that have been removed.

Lubricate the grease fitting that is on the fan drive bearing with Bearing Lubricant or the equivalent.

Inspect the fan drive pulley assembly for wear or for damage. If the shaft is loose, an inspection of the internal components should be performed. Refer to the Service Manual for additional information.

Caterpillar Information System:

C-12 Generator Set Engine System Configuration Parameters
C7 Petroleum Engines Fuel Filter Base
2005/10/03 Improved Thermocouples are Now Used {7498}
TH48-E80 Oil/Gas Transmission Transfer Gears - Assemble - Auxiliary
TH48-E80 Oil/Gas Transmission Transfer Gears - Disassemble - Auxiliary
TH48-E80 Oil/Gas Transmission Transfer Gears - Assemble - Idler
C-12 Generator Set Engine Ether Injection System - Test
C4.4 and C6.6 Industrial Engines and Engines for Caterpillar Built Machines CID 1785 FMI 10
345C MHPU Mobile Hydraulic Power Unit Machine Systems Swing Drive - Install
C-12 Generator Set Engine Event Codes
2005/08/01 New Serial Number Prefix {1000}
345C MHPU Mobile Hydraulic Power Unit Machine Systems Swing Drive - Remove
C7 Industrial Engines Fuel Filter Base
C7 On-highway Engine Fuel Filter Base
TH48-E80 Petroleum Transmission Power Train Electronic Control System System Schematic
C-12 Generator Set Engine Analog Sensor Supply Circuit - Test
C15 Generator Set Engines System Configuration Parameters
TH48-E80 Oil/Gas Transmission Transmission Planetary - Remove
TH48-E80 Oil/Gas Transmission Transmission Planetary - Install
C-12 Generator Set Engine Engine Pressure Sensor Open or Short Circuit - Test
C-12 Generator Set Engine Engine Temperature Sensor Open or Short Circuit - Test
2005/10/03 New Inlet Valve Seats are Now Used {1103}
TH48-E80 Oil/Gas Transmission Transmission Hydraulic Control - Disassemble
TH48-E80 Oil/Gas Transmission Transfer Gear Planetary (Speed Increase) - Remove
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.