Transfer Gears - Remove - Auxiliary
拆卸步骤
注: 清洁度是一项重要的因素。 开始进行拆卸步骤之前，应彻底清洁部件外部。 这将有助于防止脏污进入内部机构。
Show/hide table
| 注意 |
|---|
在检验、保养、测试、调整及维修发动机时，请小心确保盛接流出的液体。 在打开或拆解任何储有液体的部件之前，要准备好合适的容器收集液体。 有关适合收集和盛接卡特彼勒产品上的液体的工具和供应品，请参阅专门出版物, NENG2500, "卡特彼勒代理商工具目录"。 按照本地法规和条例处置所有液体。 |
- 卸下盖 (1) 和密封垫。
Show/hide table
 | |
| 图 1 | g01196773 |
- 卸下螺栓 (4) 、分动器 (3) 和垫片 (2) 。
Show/hide table
 | |
| 图 2 | g01196776 |
Caterpillar Information System:
TH48-E80 Oil/Gas Transmission Transfer Gears - Disassemble - Idler
345C Excavator and 345C MHPU Mobile Hydraulic Power Unit Machine Systems Counterbalance Valve (Travel) - Install
TH48-E80 Oil/Gas Transmission Transfer Gears - Install - Idler
TH48-E80 Oil/Gas Transmission Transfer Gears - Remove - Idler
C-12 Generator Set Engine Sensors and Electrical Connectors
TH48-E80 Oil/Gas Transmission Speed Sensor (Transmission) - Install
TH48-E80 Oil/Gas Transmission Speed Sensor (Transmission) - Remove
C15 Petroleum Generator Set Engines Turbocharger
TH48-E80 Oil/Gas Transmission Control Manifold - Assemble
TH48-E80 Oil/Gas Transmission Control Manifold - Disassemble
TH48-E80 Oil/Gas Transmission Control Manifold - Install
C15 Petroleum Generator Set Engines Fuel Filter Base
TH48-E80 Oil/Gas Transmission Transfer Gears - Install - Auxiliary
345C MHPU Mobile Hydraulic Power Unit Machine Systems Swing Drive - Remove
2005/08/01 New Serial Number Prefix {1000}
C-12 Generator Set Engine Event Codes
345C MHPU Mobile Hydraulic Power Unit Machine Systems Swing Drive - Install
C4.4 and C6.6 Industrial Engines and Engines for Caterpillar Built Machines CID 1785 FMI 10
C-12 Generator Set Engine Ether Injection System - Test
TH48-E80 Oil/Gas Transmission Transfer Gears - Assemble - Idler
TH48-E80 Oil/Gas Transmission Transfer Gears - Disassemble - Auxiliary
TH48-E80 Oil/Gas Transmission Transfer Gears - Assemble - Auxiliary
2005/10/03 Improved Thermocouples are Now Used {7498}
C7 Petroleum Engines Fuel Filter Base