Vibration Damper and Pulley - Remove and Install
Show/hide table
Required Tools | |||
Tool | Part Number | Part Description | Qty |
A | - | Guide Stud 1/2 - 13 NC by 3 inch |
2 |
- Remove the belt from the engine.
Show/hide table
Illustration 1 g01187749 Show/hide tableIllustration 2 g01187800 - Remove nuts (1) and pulley (2).
- Remove two bolts (3) and install Tooling (A).
- Remove remaining bolts (3).
- Attach a suitable lifting device onto vibration damper (4). The weight of vibration damper (4) is approximately
35 kg (76 lb) . Remove vibration damper (4) from the adapter.
Show/hide table
Required Tools | |||
Tool | Part Number | Part Description | Qty |
A | - | Guide Stud 1/2 - 13 NC by 3 inch |
2 |
- Install Tooling (A) in the adapter.
- Attach a suitable lifting device onto vibration damper (4). The weight of vibration damper (4) is approximately
35 kg (76 lb) . Position vibration damper (4) on the adapter. - Install bolts (3). Remove Tooling (A).
- Install remaining bolts (3). Tighten bolts (3) to a torque of
105 ± 20 N·m (77 ± 15 lb ft) . - Install pulley (2) and nuts (1). Tighten nuts (1) to a torque of
135 ± 20 N·m (100 ± 15 lb ft) . - Install the belt on the engine.
Show/hide table
Illustration 3 | g01187800 |
Show/hide table
Illustration 4 | g01187749 |
Caterpillar Information System:
3500 Engines with EUI Option Crankshaft Position for Fuel Injector Adjustment and Valve Lash Setting
C9-XQ300 Rental Generator Set XQ Rental Generator Set Support
324D, 325D, 326D and 329D Excavators and 329D MHPU Mobile Hydraulic Power Unit Machine Systems Control Module (Automatic Temperature Control Unit) - Remove and Install
324D, 325D, 326D and 329D Excavators and 329D MHPU Mobile Hydraulic Power Unit Machine Systems Pressure Switch (Refrigerant Pressure Cutoff) - Remove and Install
C4.4 and C6.6 Industrial Engines and Engines for Caterpillar Built Machines CID 2246 FMI 06
C4.4 Industrial Engine Sensors and Electrical Components
C4.4 and C6.6 Engines for Caterpillar Built Machines CID 1834 FMI 02
324D, 325D, 326D and 329D Excavators and 329D MHPU Mobile Hydraulic Power Unit Machine Systems Evaporator Coil - Install
C4.4 Industrial Engine High Pressure Fuel Lines
324D, 325D, 326D and 329D Excavators and 329D MHPU Mobile Hydraulic Power Unit Machine Systems Evaporator Coil - Remove
324D, 325D, 326D and 329D Excavators and 329D MHPU Mobile Hydraulic Power Unit Machine Systems Heater Core - Install
324D, 325D, 326D and 329D Excavators and 329D MHPU Mobile Hydraulic Power Unit Machine Systems Heater Core - Remove
C9-XQ300 Rental Generator Set Control Panel
345C MHPU Mobile Hydraulic Power Unit Engine Supplement Alternator - Remove and Install
C6.6 Industrial Engine Basic Engine
C4.4 and C6.6 Industrial Engines and Engines for Caterpillar Built Machines CID 0091 FMI 02
C6.6 Engines for Caterpillar Built Machines Engine Oil Pressure
C4.4 and C6.6 Industrial Engines and Engines for Caterpillar Built Machines CID 0091 FMI 03
C4.4 and C6.6 Industrial Engines and Engines for Caterpillar Built Machines CID 0091 FMI 04
C4.4 and C6.6 Engines for Caterpillar Built Machines CID 0247 FMI 09
C32 Marine Engines Crankshaft Front Seal - Install
C4.4 and C6.6 Industrial Engines and Engines for Caterpillar Built Machines CID 0774 FMI 02
TH48-E80 Petroleum Transmission Power Train Electronic Control System MID 027 - CID 0707 - FMI 03
345C MHPU Mobile Hydraulic Power Unit Engine Supplement Electric Starting Motor - Remove and Install